Pioneer VSX-37TX, VSX-36TX manual System Off

Using Other Functions

System Off

The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with the push of only one button on the remote control (this feature will only work with components that have a standby mode). For example, you can program the unit to stop your DVD, turn off your TV, turn off your DVD player and turn off the receiver itself. You don't need to program in other the power for PIONEER components, they will go off automatically in this mode. The receiver itself will go off automatically as well.

The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight possible components.

memo Be sure to recall or teach the remote control commands for each component before attempting MULTI OPERATIONS (see “Setting Up the Remote Control to Control Other Components,“ page 58-

61).

1Set the remote control slide switch to

SETUP.

ë￿	USE	SETUP
S0URCE		RECEIVER

MULTI	SYSTEM
OPERATION	OFF

6-2	DVD/LD	TV/SAT	VCR1	VCR2
		MULTI CONTROL
	CD	MD/	TUNER	TVCONT
		TAPE1

CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +
1 Á￿ 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE	0		EXIT
			ENTER
+10			DISC
+	TV		+
TV VOL	TV CONTROL		VOLUME
–	TV FUNC		–

1 Also make sure that your TV is on and set to the receiver.

3	2 Press the REMOTE SETUP (INPUT ATT)
4
	button and 3 at the same time to select
6-1
	the MULTI OPERATION SETUP mode.
2	The REMOTE SETUP menu appears on your TV screen. The
	MULTI CONTROL and the SYSTEM OFF buttons start to blink.
	To cancel MULTI OPERATION SETUP mode, press REMOTE
	SETUP.
5
	3 Press the SYSTEM OFF button.
	The SYSTEM OFF button will blink.

2	REMOTE SETUP				4	Press the MULTI CONTROL button for the
	SYSTEM SETUP
	INPUT	MENU		MUTE
	ATT					component whose operation you want to
	EFFECT/	+		FUNCTION
	CH SEL
		ENTER				start SYSTEM OFF with (for example, TV
	NR	–		SELECT
	DIGITAL			SIGNAL		CONT button).
		MULTI CH	/DTS	STEREO/
	MIDNIGHT		DSP
		INPUT		DIRECT

LIGHT THX ADVANCED STANDARD The selected button will light steadily.

OPERATION

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

5Press the operation, for example TV (POWER), you want to input.

6Repeat steps 3 and 4 to program a sequence of up to five stop or power off commands you want to input.

You can repeat this process for up to five

commands.

For example : you could enter the following two operations using the proceeding steps 3 and 4.

1Press TV CONT button & TV (POWER) to turn off your TV (as explained above).

2Press DVD/LD then (POWER) to turn off your DVD player (if it is not a PIONEER product).

When you employ SYSTEM OFF (see below), these two tasks will be performed in the same order.

•To exit SYSTEM OFF SETUP mode, press REMOTE SETUP.

•When you're done setting up, remember to set the slide switch back to USE.

73