Basic Playback
DUAL MONO Setting
The dual mono setting can only be used when listening to Dolby Digital discs that have dual mono software encoded in them. Dual mono software usually is used to put two different soundtracks on one DVD. With this setting you can choose which channel in the dual mono setting you want to listen to. Thus, it is useful for soundtracks that have one language on one channel and a different language on the other. Remember this setting is only applicable if you are using Dolby Digital software with dual mono and want to isolate one of the channels therein. Otherwise, just ignore this function.
.
1,2 | 3 | 2 |
|
| NºmÀ²³õm |
DUAL ch1 setting
DUAL ch2 setting
DUAL ch1/ch2 setting
When DUAL MONO is playing with ch 1 selected the L will light. When playing with ch 2 selected the R will light. When playing with ch 1/2 selected the L and R will light.
1Put the receiver in STANDBY mode.
2While holding down the VIDEO SELECT button press the 
STANDBY/ ON button on the front panel.
3You will see DUAL in the display for about five seconds. During this time use the STEREO/DIRECT button to cycle through the different DUAL MONO settings to find the one you want.
The different settings are: DUAL ch1, where you only hear channel 1; DUAL ch2, where you only hear channel 2; and DUAL ch1/ch2, where you hear both channels, but independently from different speakers.
The default setting is DUAL ch1.
OPERATION
53