Pioneer S-X360, SX-X360 manual Connecting up

Page 10

02Connecting up

1Connect the Xbox 360 to your TV and the receiver subwoofer.

a.Connect the Xbox 360 Component HD AV Cable (this is supplied with your Xbox 360) to the AV port on the rear of the Xbox 360 console.

Plug the yellow video plug into a video input on your TV/monitor. Plug the red/white audio plugs into the audio inputs on your TV/monitor.

If your TV has a component video input, you can use this instead of the yellow (composite) video connection. See your Xbox 360 user manual for more information.

b.Plug an optical cable (supplied) into the XBOX 360 (OPTICAL) jack on the rear of the receiver subwoofer, then plug the other end into the digital audio output on the HD AV Cable.

c. If you want to fix to a wall or other surface, perform step b after first securing the stand with screws.

It is recommended that you determine the reception strength before securing the stand with the screws.

4Connect the AM and FM antennas1.

a.Connect one wire of the AM loop antenna to each AM antenna terminal2.

For each terminal, press down on the tab to open; insert the wire, then release to secure.

1

2

2Connect the display unit to the receiver subwoofer. Plug the L-shaped end of the display cable into the connector on the rear of the display unit, then plug the other end of the display cable into SYSTEM CONNECTOR jack on the receiver subwoofer.

To attach the stands to the display unit, slip the two spurs on the top of each stand into the corresponding holes on the rear of the display unit, then snap the stand into place by pushing the catches on the stand base into the bottom set of holes (as shown).

3Assemble the AM loop antenna.

a

b

c

a. Bend the stand in the direction indicated by the arrow.

b. Clip the loop onto the stand.

b. Push the FM antenna3 plug onto the center pin of the FM antenna socket.

5Connect each speaker.

Each speaker cable has a color-coded connector at one end and two wires at the other end.

Color-coded wire

(Connect to speaker)

Color-coded connector (Connect to rear panel)

Twist and pull off the protective shields on each wire.

Connect the wires to the speaker. Match the colored wired with the color-coded label (model label), then insert the colored wire into the red (+) side and the other wire into the black (Ð) side.

Note

1 • Keep antenna cables away from other cables, the display unit, receiver subwoofer and DVD recorder.

If reception with the supplied antenna is poor, see Improving poor FM reception and Improving poor AM sound on page 22 or Connecting external antennas on page 26.

2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical appliances.

The signal earth ( ) is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety earth.

If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.

For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.

3 • To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

10

En

Image 10
Contents HTP-GS1 Operating Environment Risk of Electric Shock Do not OpenImportant the Moulded Plug What’s in the box Speakers S-X360 boxContents Safety precautions when setting up Speaker Setup GuideSpeaker Setup Guide Chapter Home theater sound setupSpeaker Setup Guide Front surround setupMm to 7 mm Before mounting Additional notes on speaker placementAttaching the brackets Bracket screw supplied Mm 10 mmBasic connections Connecting upConnecting up Chapter English Receiver subwooferConnecting up Listening position Receiver subwooferTo AC outlet Center GreenConnecting up Using this system for TV audio Display unit Controls and displaysControls and displays Chapter DisplayControls and displays Remote control Controls and displays Using the remote control Putting the batteries in the remote controlGetting started System demo settingUsing the Auto Mcacc setup for optimal surround sound Getting started ChapterGetting started Press McaccListening to your system Auto listening modeDolby Pro Logic II Music settings Listening to your system ChapterExtpower Listening to your system Using Front SurroundUsing Advanced Surround Listening in stereoAdjusting the bass and treble Listening to your system Using the Sound RetrieverUsing Quiet and Midnight listening modes Enhancing dialogueListening to your system Boosting the bass level Bassmode then press EnterListening to the radio Chapter Listening to the radioListening to the radio Displaying RDS information Listening to the radio Using RDSSearching for RDS programs You can search for a program type listed aboveSurround sound settings Chapter Surround sound settingsUsing the Setup menu Adjusting the channel levels using the test tone Surround sound settingsDual mono setting Other connections Connecting auxiliary componentsConnecting external antennas Other connections ChapterOther connections SR+ Setup for Pioneer plasma displaysAutomatic plasma display volume muting DisplayAutomatic plasma display input switching Using the SR+ mode with a Pioneer plasma displayAbout the control out jack Additional information Additional information Setting up the remote to control yourGlossary TV Volume Using the TV remote control buttonsPreset code list InputAdditional information Troubleshooting GeneralError Messages TunerAdditional information Specifications X360 Speaker systemPioneer Europe NV Pioneer Electronics USA INCPioneer Electronics of CANADA, INC Pioneer Electronics DE Mexico S.A. DE C.V