Pioneer S-3EX manual Other Information, Attaching/Removing the Grille Cover, Specifications

Page 11

Other Information

Attaching/Removing the Grille Cover

This speaker system comes with grille covers which may be attached and removed by:

1To attach the grille cover, line up the holes on the speaker with the inserts on the grill, and press firmly.

2To remove the grille cover, grab it by its bottom with both hands and gently pull toward you to separate the bottom part of the grille from the speaker.

3Slide your hands up to the middle section of the grille, and once again pull gently toward you. This will remove the middle section of the grille from the speaker.

4Finally, repeat this same motion for the top part of the grille, removing the grille entirely from the speaker.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to keep the cabinet clean. If necessary, clean with a cloth dipped in a neutral cleanser diluted five or six times with water, and wrung out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit since these will corrode the surfaces.

Specifications

Enclosure

14. . . . .cm.(5. .

. . . . . . . Bass-reflex floorstanding type

English

Mid tweeter

1/2 inch) cone / 3 cm (1 3/16 inch) dome

 

 

 

(magnetically shielded)

 

Configuration

. . . . .

. . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .3-way

 

Woofer

. . . . .

. . .

. . . . . . . . . . 16 cm (6 5/16 inch) cone x2

 

Nominal impedance

. . . . .

. . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

 

Frequency response .

. . . . .

. . .

. . . . . . . . . . . . . . . . . . 30 Hz to 100 kHz

 

Sensitivity

. . . . .

. . .

. . . . . . . . . . . . . . . . . . . 88.5 dB (2.83 V)

 

Maximum input power . . . .

. . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . 160 W

 

Exterior dimensions .

. . . . .

350 (W) mm x 1224 (H) mm x 541 (D) mm

 

13 3/4 (W) in. x 48 3/16 (H) in. x 21 5/16 (D) in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 kg/105 lbs. 13 oz.

Supplied accessories

Spike bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Mounting pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 types, 2 each Metal catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Screw (for metal catch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Grille . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating instructions

Specifications and design subject to possible modification without notice, due to improvements.

Magnetic shielding

This speaker system is magnetically shielded. However, depending on the installation location, color distortion may occur if the speaker system is installed extremely close to the screen of a television set.

If this happens, turn off the television, then turn it on again after 15 min to 30 min. If the problem persists, place the speaker system away from the television set.

is a trademark placed on a product with Pioneer’s Phase Control technology. This technology enables high-grade sound reproduction through each component by improving overall phase matching.

Published by Pioneer Corporation.

Copyright © 2007 Pioneer Corporation.

All rights reserved.

11

En

Image 11
Contents Page Contents What’s in the box Before you startCeramic Graphite Diaphragm About the EX seriesTechnology behind the S-3EX Collaboration with Air Studios Bass DriversBass Enclosure Construction Crossover NetworksMetal catch Sufficiently thick cord Backside of speaker Installation and PlacementHow to install Mounting the Fall-Prevention FastenerLeft Right Cm to 60 cm Choosing Where To Place The Speaker SystemsCm to 60 cm Connections Connecting to an amplifierConnecting the cables Short bar connectorsOnly one channel shown Single-Wire ConnectionsHorizontal Bi-Amping Bi-Amplification ConnectionsVertical Bi-Amping Attaching/Removing the Grille Cover Cleaning the speaker cabinetSpecifications Other InformationAutres informations Installation et placementInstructions d’installation Fixation de l’attache antichute ConnexionsPrécautions d’emploi Précautions d’installationAvant de commencer Contenu de l’emballageAluminium Propos de la série EXTechnologies à l’appui du S-3EX Diaphragme en graphite céramiqueCollaboration avec Air Studios Haut-parleurs de gravesEbénisterie FiltresCales de liège Installation et placementInstructions d’installation Fixation de l’attache antichuteEnceinte Gauche Droite 30 cm à 60 cm Choix d’un emplacement pour les enceintes acoustiques30 cm à 60 cm Straps ConnexionsConnexions à un amplificateur CâblageSeule une voie est indiquée Mono-câblageBi-amplification horizontale Câblage pour bi-amplificationBi-amplification verticale Fiche technique Autres informationsMise en place et retrait de la grille Entretien de l’enceinteInformación adicional Instalación y situaciónConexiones Precaución durante la utilización Antes de comenzarContenido de la caja Precaución instalaciónAluminio Acerca de la serie EXTecnología que respalda el S-3EX Diafragma de grafito cerámicoColaboración con Air Studios Excitadores de gravesConstrucción de la caja acústica de graves Redes de frecuencias de cruceAlmohadilla de montaje Instalación y situaciónModo de instalación Montaje del fijador de seguridad contra caídasPosición de audición Cm a 60 cmAltavoz Izquierdo Derecho Cm a 60 cm Barra cortocircuitadora Terminal negro Terminal rojo ConexionesConexión al amplificador Conexión de los cablesSólo se muestra un canal Conexiones de un cable sencilloPrecaución Conexiones para dos amplificadoresDos amplificadores en vertical Dos amplificadores en horizontalEspecificaciones Información adicionalColocación/extracción de la cubierta de rejilla Limpieza格柵蓋的裝卸 揚聲器機箱的維護 規格 如何安裝 安裝防落緊固件 選擇安置揚聲器系統的地方 連接於放大器 電纜的連結 單線連接 雙線連接 雙放大器接線開始之前 速度m/s 關於 EX 系列精密曲線 中國語 安裝與設置 30 cm 到 60 cm 選擇安置揚聲器系統的地方連接於放大器 放大器(後) 雙放大器接線 其他資訊 安装 / 拆除支架盖 清理扬声器机壳 规格 如何安装 安装防跌落紧固件 选择安放扬声器系统的位置 连接到放大器 连接电缆 单线连接 双线连接 双功放连接包装箱内的零部件 关于 EX 系列 精密曲线 安装与放置 选择安放扬声器系统的位置 连接到放大器 放大器(背部) 双功放连接 其他资料 AFTER-SALES Service for Pioneer Products

S-3EX specifications

The Pioneer S-3EX stands out as a remarkable offering in the world of high-fidelity audio systems. Renowned for its impressive sound quality and dynamic performance, this speaker adeptly caters to audiophiles and casual listeners alike. The S-3EX is distinguished by its innovative technologies and thoughtful design, ensuring an exceptional listening experience across various genres.

One of the main features of the S-3EX is its unique construction that employs high-grade materials to facilitate superior sound reproduction. It is engineered with a robust cabinet designed to minimize resonance and vibrations, which can interfere with audio clarity. The cabinet's shape and internal bracing contribute to an optimal acoustic environment, delivering clear and rich sound.

The speaker utilizes a three-way design, incorporating a 1-inch soft dome tweeter, a 4-inch midrange driver, and two 8-inch woofers. This configuration allows for an extensive frequency response, ensuring detailed highs, articulate mids, and deep, powerful lows. The incorporation of dual woofers is particularly beneficial for bass-heavy music, providing a rich depth that enhances the overall listening experience.

One of the standout technologies featured in the S-3EX is Pioneer’s proprietary “Advanced Wide Dispersion” technology. This innovation ensures that sound is evenly distributed throughout the space, making it ideal for larger rooms or gatherings. Listeners can enjoy a consistent audio experience, regardless of their position in the room.

Additionally, the S-3EX benefits from Pioneer's “Natural Sound” philosophy, which aims to deliver music that accurately represents the original recording. This commitment to authenticity is realized through careful tuning and innovative engineering, making the S-3EX a true representation of Pioneer’s dedication to high-quality sound.

The sensitivity rating of the S-3EX is noteworthy, allowing for compatibility with a wide range of amplifiers and audio configurations. This versatility makes it an excellent choice for both dedicated audiophiles and those who may be exploring high-fidelity audio for the first time.

In summary, the Pioneer S-3EX combines exceptional build quality, innovative design, and advanced audio technologies to create a speaker that resonates with music lovers. Its three-way configuration, wide dispersion capabilities, and commitment to natural sound establish it as a standout choice in the high-fidelity speaker market, delivering an immersive audio experience that captivates and delights.