Connecting up
Important
•When connecting, make sure that all components are switched off and unplugged.
•Do not use the supplied cords or AC adapter for any other purpose than that described here.
1Connect the DVD IN jacks on the transmitter to a set of stereo output jacks on your DVD player.
Use a commercially available RCA/phono stereo audio cable to do this.
2Connect the TV OUT jacks on the transmitter to the stereo audio input jacks on your TV.
Use the supplied RCA/phono stereo audio cable to do this.
3If you have a subwoofer, connect the SUBWOOFER OUT jack on the transmitter to the input jack on your subwoofer.
Use a commercially available RCA/phono mono audio cable to do this.
•If you don’t own a subwoofer, you can omit this step and still achieve convincing surround sound from your system.
•Please refer to the operating instructions supplied with your subwoofer when connecting.
4Connect the supplied AC adapter to the DC IN inlet on the rear panel of the transmitter, then plug into a power outlet.
5Connect the wireless speaker AC power cord to the AC IN inlet on the rear panel of the wireless speaker, then plug into a power outlet.
03
English
15
En