Classe Audio CA-5200 owner manual Front Panel, Standby button & LED indicator

Page 11

Front Panel

1Standby button & LED indicator

The front panel Standby button will toggle the amplifier between operate, its fully operational state, and a standby mode that leaves the amplifier off, yet ready to respond to system commands via any of the supported control options (e.g. IR input, DC trigger, CAN-Bus, or RS-232).

The current state of the amplifier is indicated by the LED indicator in the center of the Standby button. The state of this LED indicates the following:

on

=

standby

flashing (on power-up)

=

initialization

• off + Channel LED on

=

operate

flashing (after power-up)

=

AC mains voltage out of range

When in standby, the amplifier’s gain stages are powered down. Only a small power supply and control circuit remain on, consuming relatively little power. Fortunately, since the output stages by their nature conduct a great deal of current, they warm up and sound their best very quickly.

If you are not going to use the amplifier for an extended period of time, perhaps while traveling for a vacation, we suggest you disconnect it from the AC mains. Please be certain that the amplifier is in standby prior to disconnecting it from the AC mains.

11

Image 11
Contents CA-5200 Power Amplifier Page Important Safety Instructions Contents Welcome to the Classé family Word about installationUnpacking your amplifier Placement Ventilation Unpacking and PlacementPage Warm up/break-in period Please read this manual… Extensive listening tests Special Design FeaturesExtraordinary longevity Robust protection Front Panel Standby button & LED indicatorSelect button Channel status LED indicatorsMode button Balanced XLR Input Rear PanelClassé CAN-Bus Control Ports Single-Ended RCA InputSpeaker Outputs DC Trigger Input and Output IR Input and OutputAC Mains Fuse RS-232 Control PortAC Mains Input Configure your amplifier Initial SetupConfiguring balanced/ single-ended operation Make your speaker connections Configuring amplifier turn-on delay/amp noMake your preamp connections Double-check all your connections FeaturesCAN-Bus CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus Configuration Operate AC status Status CAN-Bus shared featuresPlayLink Name Global brightness Global standbyAmp info Event log Care and Maintenance Amplifier keeps shutting off TroubleshootingNo sound, and no Channel LED is lit No sound, and one or more Channel LEDs is blinking redPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 48 pages 4.7 Kb

CA-5200 specifications

The Classe Audio CA-5200 is a high-performance power amplifier that exemplifies the pinnacle of audio engineering. Designed to deliver exceptional sound quality and robust power, the CA-5200 is a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the CA-5200 is its impressive power output. With a five-channel configuration, it provides an astounding 200 watts per channel into 8 ohms, delivering superior dynamics and headroom. This makes it an ideal choice for driving a wide range of loudspeakers, from compact, bookshelf models to larger, floor-standing options. The amplifier can effortlessly handle the demands of both music and multichannel movie soundtracks, ensuring that every nuance is captured with fidelity.

The CA-5200 utilizes Class A/B amplification technology, which is renowned for its efficiency and warmth. This technology combines the benefits of Class A operation—characterized by low distortion and an open soundstage—with the efficiency of Class B operation. The result is a powerful amplifier that remains cooler in operation while still providing rich, detailed sound reproduction across the frequency spectrum.

Another essential feature of the CA-5200 is its advanced circuitry and build quality. The use of high-grade components throughout, including custom power transformers and large filter capacitors, ensures that the amplifier can handle transient peaks and demanding listening sessions without strain. The resulting sound is clear and dynamic, with an emphasis on accuracy and naturalness, catering to the most discerning listening tastes.

Classe Audio also integrates their proprietary AutoBias technology into the CA-5200, which automatically adjusts the bias settings of the output transistors for optimal performance under various load conditions. This feature ensures consistent sound quality, regardless of the dynamics of the material being played or the impedance of the connected speakers.

In terms of connectivity, the CA-5200 offers multiple input options, allowing for seamless integration into a variety of audio systems. The amplifier’s front panel is carefully designed, featuring easy-to-read indicators and user-friendly controls, making it simple to operate even in a complex setup.

Overall, the Classe Audio CA-5200 stands out as a powerful and versatile amplifier that marries technology with craftsmanship. Whether used in a dedicated two-channel audiophile setup or as part of an immersive home theater experience, the CA-5200 delivers the sonic performance that captivates and engages music and movie lovers alike.