Single-Ended RCA Input, Speaker Outputs

The pin assignments of these XLR input connectors are:

Pin 1: Signal ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal – (inverting)

Connector ground lug: chassis ground

These pin assignments are consistent with the standard adopted by the Audio Engineering Society (AES14-1992).

If you are using your Classé power ampliﬁer with a Classé preampliﬁer, you’re all set – just take standard balanced interconnect cables and plug them in.Then engage that input on the power ampliﬁer by conﬁguring it as described in Initial Setup.

If you are using another brand of preampliﬁer, please refer to the operating manual of your balanced-output preampliﬁer to verify that the pin assignments of its output connectors correspond to your ampliﬁer. If not, have your dealer wire the cables so that the appropriate output pin connects to the equivalent input pin.

2Single-Ended (RCA) Input

Single-ended cables using RCA connectors are the most common form of analog connection used in consumer electronics. When implemented carefully and with use of high quality interconnecting cables, this standard can provide excellent performance. Classé has gone to extraordinary eﬀort to ensure that the single-ended (RCA) inputs of your power ampliﬁer are as good as possible. However, this connection standard cannot oﬀer the immunity from interference that balanced interconnection does—hence our recommendation to use the balanced inputs when possible.

If you elect to use the single-ended inputs of your Classé power ampliﬁer, you need to engage them by conﬁguring the ampliﬁer as described in Initial Setup.

3Speaker Outputs

A pair of high quality ﬁve-way binding posts is provided for each channel of the ampliﬁer.

Although the binding posts on your Classé ampliﬁer will accept bare wire connections, we strongly recommend the use of high quality spade or hook lugs, crimped and soldered onto the ends of your speaker wires. Using high quality connectors will ensure that your speaker connections do not gradually deteriorate from fraying and oxidizing bare wires. It also helps prevent accidental short-circuits from poorly-terminated connections.

4Classé CAN-Bus Control Ports

These RJ-45connectors are reserved for future control and communication applications using Classé Audio’s implementation of the Controller Area Network (CAN) Bus speciﬁcation.

CA-5200 specifications

The Classe Audio CA-5200 is a high-performance power amplifier that exemplifies the pinnacle of audio engineering. Designed to deliver exceptional sound quality and robust power, the CA-5200 is a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the CA-5200 is its impressive power output. With a five-channel configuration, it provides an astounding 200 watts per channel into 8 ohms, delivering superior dynamics and headroom. This makes it an ideal choice for driving a wide range of loudspeakers, from compact, bookshelf models to larger, floor-standing options. The amplifier can effortlessly handle the demands of both music and multichannel movie soundtracks, ensuring that every nuance is captured with fidelity.

The CA-5200 utilizes Class A/B amplification technology, which is renowned for its efficiency and warmth. This technology combines the benefits of Class A operation—characterized by low distortion and an open soundstage—with the efficiency of Class B operation. The result is a powerful amplifier that remains cooler in operation while still providing rich, detailed sound reproduction across the frequency spectrum.

Another essential feature of the CA-5200 is its advanced circuitry and build quality. The use of high-grade components throughout, including custom power transformers and large filter capacitors, ensures that the amplifier can handle transient peaks and demanding listening sessions without strain. The resulting sound is clear and dynamic, with an emphasis on accuracy and naturalness, catering to the most discerning listening tastes.

Classe Audio also integrates their proprietary AutoBias technology into the CA-5200, which automatically adjusts the bias settings of the output transistors for optimal performance under various load conditions. This feature ensures consistent sound quality, regardless of the dynamics of the material being played or the impedance of the connected speakers.

In terms of connectivity, the CA-5200 offers multiple input options, allowing for seamless integration into a variety of audio systems. The amplifier’s front panel is carefully designed, featuring easy-to-read indicators and user-friendly controls, making it simple to operate even in a complex setup.

Overall, the Classe Audio CA-5200 stands out as a powerful and versatile amplifier that marries technology with craftsmanship. Whether used in a dedicated two-channel audiophile setup or as part of an immersive home theater experience, the CA-5200 delivers the sonic performance that captivates and engages music and movie lovers alike.