Configuring amplifier turn-on delay/amp no

configuring amplifier turn-on delay/amp no.

In a system that contains multiple Classé ampliﬁers, you may set the number of seconds of turn-on delay for each ampliﬁer, allowing each to turn on in the order you have speciﬁed, rather than all at once. This number also acts as an ID when using the CAN-Bus. (Having several powerful ampliﬁers all turning on at the same time can sometimes stress the AC mains in your home, potentially leading to nuisance tripping of circuit breakers).

For example, to set the delay for two seconds (and to designate a particular ampliﬁer as #2):

•Place the ampliﬁer in standby (Standby LED on)

•Press and hold the Mode button until both Channel LEDs are lit. When released, both LEDs will blink to indicate the turn-on delay and current number of the ampliﬁer (e.g. once to indicate a one second delay and ampliﬁer #1).

•If you want to change the current ampliﬁer number setting, press and hold the Mode button again until both Channel LEDs are on.

•While continuing to hold the Mode button, press the Select button two times (the same number as the desired delay in seconds and the ampliﬁer number);

•Release the Mode button. The ampliﬁer will conﬁrm your choice by blinking the Channel LEDs twice.

4.Make your preamp connections.

With the ampliﬁer in standby (or disconnected from the AC mains), and using high quality interconnecting cables, make the appropriate connections with the balanced or single-ended connectors (as conﬁgured in Step 3).

Make sure all the connections are snug, even if it means gently squeezing the outer shell of the RCA with pliers and reinserting it to tighten the connection.

5.Make your speaker connections.

Make the connection between the output terminals of the ampliﬁer and your loudspeakers, using high quality speaker wires.

Connect the black (–) terminals on the ampliﬁer to the black (–) terminals on your speaker, and the red (+) terminals on the ampliﬁer to the red (+) terminals on your speaker.

If bi-wiring, run a total of four conductors between each ampliﬁer channel and its corresponding loudspeaker: two separate +/– leads, one for the bass and the other for the mids and treble. Make sure that no wires cross between the red (+) and black (–) terminals, at either end.

Make sure all the connections are snug and cannot be easily wiggled free, but do not overtighten them. If you can give the speaker wires a reasonable tug without movement, they are snug. Further tightening will not make a better connection, and (taken to the extreme) may damage the connectors.

CA-5200 specifications

The Classe Audio CA-5200 is a high-performance power amplifier that exemplifies the pinnacle of audio engineering. Designed to deliver exceptional sound quality and robust power, the CA-5200 is a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the CA-5200 is its impressive power output. With a five-channel configuration, it provides an astounding 200 watts per channel into 8 ohms, delivering superior dynamics and headroom. This makes it an ideal choice for driving a wide range of loudspeakers, from compact, bookshelf models to larger, floor-standing options. The amplifier can effortlessly handle the demands of both music and multichannel movie soundtracks, ensuring that every nuance is captured with fidelity.

The CA-5200 utilizes Class A/B amplification technology, which is renowned for its efficiency and warmth. This technology combines the benefits of Class A operation—characterized by low distortion and an open soundstage—with the efficiency of Class B operation. The result is a powerful amplifier that remains cooler in operation while still providing rich, detailed sound reproduction across the frequency spectrum.

Another essential feature of the CA-5200 is its advanced circuitry and build quality. The use of high-grade components throughout, including custom power transformers and large filter capacitors, ensures that the amplifier can handle transient peaks and demanding listening sessions without strain. The resulting sound is clear and dynamic, with an emphasis on accuracy and naturalness, catering to the most discerning listening tastes.

Classe Audio also integrates their proprietary AutoBias technology into the CA-5200, which automatically adjusts the bias settings of the output transistors for optimal performance under various load conditions. This feature ensures consistent sound quality, regardless of the dynamics of the material being played or the impedance of the connected speakers.

In terms of connectivity, the CA-5200 offers multiple input options, allowing for seamless integration into a variety of audio systems. The amplifier’s front panel is carefully designed, featuring easy-to-read indicators and user-friendly controls, making it simple to operate even in a complex setup.

Overall, the Classe Audio CA-5200 stands out as a powerful and versatile amplifier that marries technology with craftsmanship. Whether used in a dedicated two-channel audiophile setup or as part of an immersive home theater experience, the CA-5200 delivers the sonic performance that captivates and engages music and movie lovers alike.