Classe Audio CA-5200 owner manual Specifications

Page 28

28

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to adjust specifications without notice.

„

Power output

200W/ch continuous rms @ 8Ω

 

(both channels driven)

370W/ch continuous rms @ 4Ω

„

Frequency response

 

10Hz – 22kHz (+0/-0.1dB)

 

Phase

 

10Hz – 155kHz (+0/-3.0dB)

„

 

better than -10° @ 22kHz

„

Signal-to-noise ratio

 

108dB

 

Channel separation

(ref. full ouput, 10Hz – 80kHz)

„

 

better than 80dB @ 20kHz

„

Noise floor (FFT)

 

all peaks less than -95dBV

 

 

 

(10Hz – 80kHz)

„

Distortion (THD + noise)

 

0.003% @ 8Ω

 

(unweighted, 1.0Vrms/1kHz input, 10Hz – 500kHz)

„

Voltage gain

 

29.1dB

„

Sensitivity

1.4Vrms for rated output @ 8Ω

„

Input Impedance

 

100kΩ

„

Rated power consumption (as per IEC60065 para. 2.3.10) 1056W

„

Idle power consumption

 

348W

„

Mains voltage

 

specified on rear panel

 

 

(cannot be changed by dealer or user).

„

Dimensions (not incl. controls or connectors)

Width: 17.5” (445mm)

 

 

 

Height: 8.75” (222mm)

 

Shipping weight

 

Depth: 21” (534mm)

„

 

133 lbs (60kg)

„

Net weight

 

121 lbs (55kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

Image 28
Contents CA-5200 Power Amplifier Page Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Unpacking your amplifier Placement VentilationPage Warm up/break-in period Please read this manual… Special Design Features Extensive listening testsExtraordinary longevity Robust protection Standby button & LED indicator Front PanelMode button Channel status LED indicatorsSelect button Rear Panel Balanced XLR InputSpeaker Outputs Single-Ended RCA InputClassé CAN-Bus Control Ports IR Input and Output DC Trigger Input and OutputAC Mains Input RS-232 Control PortAC Mains Fuse Configuring balanced/ single-ended operation Initial SetupConfigure your amplifier Make your preamp connections Configuring amplifier turn-on delay/amp noMake your speaker connections CAN-Bus FeaturesDouble-check all your connections Hardware setup Classé Delta Series ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status StatusName Global brightness Global standby PlayLinkAmp info Event log Care and Maintenance Troubleshooting No sound, and no Channel LED is litNo sound, and one or more Channel LEDs is blinking red Amplifier keeps shutting offPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 48 pages 4.7 Kb

CA-5200 specifications

The Classe Audio CA-5200 is a high-performance power amplifier that exemplifies the pinnacle of audio engineering. Designed to deliver exceptional sound quality and robust power, the CA-5200 is a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the CA-5200 is its impressive power output. With a five-channel configuration, it provides an astounding 200 watts per channel into 8 ohms, delivering superior dynamics and headroom. This makes it an ideal choice for driving a wide range of loudspeakers, from compact, bookshelf models to larger, floor-standing options. The amplifier can effortlessly handle the demands of both music and multichannel movie soundtracks, ensuring that every nuance is captured with fidelity.

The CA-5200 utilizes Class A/B amplification technology, which is renowned for its efficiency and warmth. This technology combines the benefits of Class A operation—characterized by low distortion and an open soundstage—with the efficiency of Class B operation. The result is a powerful amplifier that remains cooler in operation while still providing rich, detailed sound reproduction across the frequency spectrum.

Another essential feature of the CA-5200 is its advanced circuitry and build quality. The use of high-grade components throughout, including custom power transformers and large filter capacitors, ensures that the amplifier can handle transient peaks and demanding listening sessions without strain. The resulting sound is clear and dynamic, with an emphasis on accuracy and naturalness, catering to the most discerning listening tastes.

Classe Audio also integrates their proprietary AutoBias technology into the CA-5200, which automatically adjusts the bias settings of the output transistors for optimal performance under various load conditions. This feature ensures consistent sound quality, regardless of the dynamics of the material being played or the impedance of the connected speakers.

In terms of connectivity, the CA-5200 offers multiple input options, allowing for seamless integration into a variety of audio systems. The amplifier’s front panel is carefully designed, featuring easy-to-read indicators and user-friendly controls, making it simple to operate even in a complex setup.

Overall, the Classe Audio CA-5200 stands out as a powerful and versatile amplifier that marries technology with craftsmanship. Whether used in a dedicated two-channel audiophile setup or as part of an immersive home theater experience, the CA-5200 delivers the sonic performance that captivates and engages music and movie lovers alike.