Classe Audio CA-5200 owner manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classé products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Please record the serial number for your new Classé component here for future reference.

Serial #: ____________________________________________

2

Image 2
Contents CA-5200 Power Amplifier Page Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Unpacking your amplifier Placement VentilationPage Warm up/break-in period Please read this manual… Special Design Features Extensive listening testsExtraordinary longevity Robust protection Standby button & LED indicator Front PanelSelect button Channel status LED indicatorsMode button Rear Panel Balanced XLR InputClassé CAN-Bus Control Ports Single-Ended RCA InputSpeaker Outputs IR Input and Output DC Trigger Input and OutputAC Mains Fuse RS-232 Control PortAC Mains Input Configure your amplifier Initial SetupConfiguring balanced/ single-ended operation Make your speaker connections Configuring amplifier turn-on delay/amp noMake your preamp connections Double-check all your connections FeaturesCAN-Bus Category 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status StatusName Global brightness Global standby PlayLinkAmp info Event log Care and Maintenance No sound, and one or more Channel LEDs is blinking red TroubleshootingNo sound, and no Channel LED is lit Amplifier keeps shutting offPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 48 pages 4.7 Kb

CA-5200 specifications

The Classe Audio CA-5200 is a high-performance power amplifier that exemplifies the pinnacle of audio engineering. Designed to deliver exceptional sound quality and robust power, the CA-5200 is a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the CA-5200 is its impressive power output. With a five-channel configuration, it provides an astounding 200 watts per channel into 8 ohms, delivering superior dynamics and headroom. This makes it an ideal choice for driving a wide range of loudspeakers, from compact, bookshelf models to larger, floor-standing options. The amplifier can effortlessly handle the demands of both music and multichannel movie soundtracks, ensuring that every nuance is captured with fidelity.

The CA-5200 utilizes Class A/B amplification technology, which is renowned for its efficiency and warmth. This technology combines the benefits of Class A operation—characterized by low distortion and an open soundstage—with the efficiency of Class B operation. The result is a powerful amplifier that remains cooler in operation while still providing rich, detailed sound reproduction across the frequency spectrum.

Another essential feature of the CA-5200 is its advanced circuitry and build quality. The use of high-grade components throughout, including custom power transformers and large filter capacitors, ensures that the amplifier can handle transient peaks and demanding listening sessions without strain. The resulting sound is clear and dynamic, with an emphasis on accuracy and naturalness, catering to the most discerning listening tastes.

Classe Audio also integrates their proprietary AutoBias technology into the CA-5200, which automatically adjusts the bias settings of the output transistors for optimal performance under various load conditions. This feature ensures consistent sound quality, regardless of the dynamics of the material being played or the impedance of the connected speakers.

In terms of connectivity, the CA-5200 offers multiple input options, allowing for seamless integration into a variety of audio systems. The amplifier’s front panel is carefully designed, featuring easy-to-read indicators and user-friendly controls, making it simple to operate even in a complex setup.

Overall, the Classe Audio CA-5200 stands out as a powerful and versatile amplifier that marries technology with craftsmanship. Whether used in a dedicated two-channel audiophile setup or as part of an immersive home theater experience, the CA-5200 delivers the sonic performance that captivates and engages music and movie lovers alike.