Handling this Unit, Dont Disassemble this Unit

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a damp cloth.

Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two lades and a third ground prong. The third prong are provided for your safety. When the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenient receptacles, and the point where they exit from thee apparatus.

Only use attachments/accessories specified by the manufacturer.

The apparatus should be placed on a solid surface with a minimum distance of 1 m from the back or side plate to the wall and not in the following environments of cases; moist place; under direct radiation sunlight or other strong heat radiation.

Unplug this apparatus during lightning storms or when unused for long periods of time

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, not operate normally, or has been dropped.

This handbook is an integral part of the product and must accompany when it is changed, to allow the new owner to get to know the installation, operating, and safety instructions.

Faulty installation of the amplifier frees EV from all responsibility.

CAUTION FOR USING POWER LINE

You shall hold plug firmly to avoid the pull-out of power line and risk occurring when you pull the power line out from AC outlet.

The plug of power line for unit should be pulled out from power outlet to cut down the power supply, when this unit isn't used for a long period.

Don't force any matter on the power line of this system to avoid the damaging power line and don't insert the knotted power line into unit.

HANDLING THIS UNIT

Check if the power supply is being shut down, the power line is pulled out from outlet and other lines connecting this unit are also disconnected.

DON'T DISASSEMBLE THIS UNIT

Servicing-Do not attempt to service the product beyond that described in the operating instructions, as opening or removing covers may expose you to dangerous voltages. All other servicing should be referred to qualified service personnel.

CLEANING

When the unit needs a cleaning, you can blow off dust from the unit with a blower or clean rag etc. Don't use solvents such as benzol, thinner, alcohol or other fluids with very strong volatility and flammability for cleaning the unit body.

!CAUTION

Don't touch the screw around the ventilation holes in the bottom board. When heat sink is working, the screw's temperature will rise higher.

If connecting interference takes place in source circuit, THD will be more than 10%.

To prevent the risk of fire or electrical shock, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

DC24V 10A

+ - COM 4 25V 70V 100V

100V

Connecting the speakers to 100V output

15."PRE OUT" terminal

This terminal output the mixed audio signals of all sources that are connected to the amplifier Inputs and can be utilized to feed an external power amplifier, a signal processor (e.g.a equalizer) or any other external appliance. The unbalanced signal is affected by the individual input controls. Before using the PRE OUT you have to remove the bridging-strip between this binding post and the "MAIN IN" terminal(16).

16."MAIN IN" terminal

After removing bridging-strip between the "PRE OUT" and the "MAIN IN" terminals you can include an external signal processor (e.g an equalizer) in the audio-chain between the pre-amplifier and the power output stage of the power amplifier. This opportunity provides a proper solution whenever shaping or improving the audio signal is necessary (adjust delay times, equalizing, eliminating the larseneffect, ect.) The input is unbalance, which affected by the tone control and the master volume control.

17."AUX 1" and "AUX 2" inputs

These two RCA-type connectors let you connect the two channels of an external high-level unbalanced signal source. Such as an AM/FM tuner, a cassette deck, a CD player, etc.. use input sensitivity switch(20). Suitable for different appliances.

Unbalanced signal (channel Lo R)

Earth

RCA plug

9				6

MA-1206, MA-1212 specifications

The EV Rider MA-1212 and MA-1206 models represent a significant advancement in mobility scooters designed for users seeking independence and convenience. These scooters are tailored for both indoor and outdoor use, providing users with a reliable means of transportation while ensuring comfort and ease of use.

One of the main features of the EV Rider MA-1212 is its compact design, which allows it to navigate tight spaces with ease. Weighing approximately 106 lbs, it is lightweight compared to many others in its class. The MA-1206 is similarly designed, making both models exceptionally maneuverable in urban environments and crowded areas. Both scooters feature a foldable design, making storage and transport hassle-free for users. The folding mechanism is straightforward, promoting accessibility for individuals of all ages.

In terms of technology, the EV Rider MA-1212 and MA-1206 boast a powerful, high-torque motor providing robust performance. With a maximum speed of around 4 mph, users can confidently travel through neighborhoods or shopping centers. The scooters offer a range of approximately 15 miles on a full charge, making them suitable for daily errands and outings. The electric-powered system ensures low running costs and minimal maintenance requirements.

Comfort is key to these scooters. The MA-1212 and MA-1206 models are equipped with ergonomically designed seats that offer ample cushioning and can be adjusted to suit individual preferences. The wide, non-slip footrest provides additional stability during rides. Furthermore, both models come with easy-to-use control panels, allowing users to adjust speed and monitor battery levels effortlessly.

Safety features are paramount in both designs, including front LED lights for visibility and rear reflectors for additional awareness. The scooters are also equipped with a responsive braking system that enhances user control when navigating inclines or declines.

In summary, the EV Rider MA-1212 and MA-1206 models stand out due to their combination of compactness, powerful performance, and user-friendly design. With advanced technologies and thoughtful features, these scooters provide a perfect solution for individuals looking to maintain their independence and mobility.