09Other connections
Important
•You can’t use the SR+ features when HDMI Control is set to ON. Make sure to set HDMI Control to OFF when you use the SR+ features (page 65).
•If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma display remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the plasma display off.
•Before you can use the extra SR+ features, you need to make a few settings in the receiver. See The Input Setup menu on page 66 and SR+ Setup for Pioneer plasma displays on page 68 for detailed instructions.
•Use a
Using the SR+ mode with a Pioneer plasma display
When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:
•
•
•
•Automatic video input switching on the plasma display.
•Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on page 68 for more on setting up the receiver.
Important
•The SR+ features do not work when any of the iPod, HOME MEDIA GALLERY
VIDEO | Pioneer plasma | VIDEO | |
INPUT 1 | INPUT 2 | ||
display | |||
|
|
DVD player | Satellite receiver, etc |
RECEIVER INPUT SELECT
CD
DVD TV
HOME MEDIA
DVR2 GALLERY
DVR1 i Pod
| SYSTEM OFF |
| SLEEP | DIMMER | ANALOG |
| SOURCE |
|
|
| ATT |
|
|
|
|
| |
|
|
| SR+ | GENRE |
|
|
| D.ACCESS |
| CLASS | |
|
|
| CLEAR | DISC | |
|
|
| +10 | CH | ENTER |
|
|
|
| LEVEL |
|
|
| A PARAMETER |
| V PARAMETER | |
|
| TOP MENU |
| MENU T.EDIT | |
| HDMI |
|
| TUNE |
|
BD | TVCTRL | BAND | ST | ST | |
|
| SETUP | ENTER | | |
| ZONE2/3 |
| RETURN | ||
TUNER | RECEIVER |
|
| TUNE |
|
|
|
| PROGRAM |
|
PTYSEARCH GUIDE
DVD/LD | SAT |
AUDIO IN | AUDIO IN |
| |
| MASTER |
| VOLUME |
This receiver
To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/ or digital) to this receiver.
62
1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display above for more on connecting these components.
•Make sure you have also selected the display input to which you’ve connected the receiver in The Input Setup menu on page 66.
2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
•The automatic video input switching and the automatic volume muting features are enabled separately; see SR+ Setup for Pioneer plasma displays on page 68.
En