Pioneer VSX-2016AV operating instructions THX Audio Setting, Choose the X-Curve setting you want

Page 48

08The System Setup menu

2 Choose the X-Curve setting you want.

Use to adjust the setting. The X-Curve is expressed as a downwards slope in decibels per octave, starting at 2 kHz. The sound becomes less bright as the slope increases (to a maximum of -3.0dB/oct). Use the following guidelines to set the X-Curve according to your room size:

Room size (m2)

≤36

≤48

≤60

≤72

≤300

≤1000

X-Curve (dB/oct)

–0.5

–1

–1.5

–2

–2.5

–3

 

 

 

 

 

 

 

•If you select OFF, the frequency curve will be flat and the X-Curve has no effect.

3 Select ‘Return’ then press ENTER to finish.

THX Audio Setting

For the most effective results when using the THX Select2 Cinema and THX MusicMode listening modes (see Using the Home THX modes on page 27) with the Advanced Speaker Array (ASA) system (see About THX on page 74), it is required that you make the setting. See THX speaker system setup on page 19 for more on THX speaker

placement.1

1Select ‘THX Audio Setting’ from the Manual SP Setup menu.

5.Manual SP Setup

a.Speaker Setting b.Channel Level c.Speaker Distance d.Bass Peak Level e.X-Curve

f.THX Audio Setting

:Return

2Specify the distance of your surround back speakers from each other.

5f.THX Audio Setting

SB SP Position

0.0-0.3m

SBL-SBR

:Finish

•0.0 – 0.3m – Surround speakers within 30 cm apart (best for THX surround sound).

•> 0.3 – 1.2m – Surround speakers between 30 cm and 1.2 m apart.

•1.2m < – Surround speakers more than 1.2 m apart.

3When you're finished, press RETURN.

You will return to the Manual SP Setup menu.

Note

1 If you don't have surround back speakers, or just have one, you won't be able to select this setting (Cannot select shows in the display).

48

En

Page 47 Page 49
Image 48
Page 47 Page 49
Contents
VSX-2016AV-S Important the Moulded Plug Risk of Electric Shock Do not OpenOperating Environment Contents Other Settings Using other functionsOther connections Controlling the rest of your systemFeatures Before you startBefore you start Chapter Checking what’s in the boxBefore you start Installing the receiver Loading the batteriesAutomatically setting up for surround sound Mcacc Minute guide02 5 minute guide Chapter Introduction to home theaterSpeaker configuration in the OSD Minute guideWait for the test tones to finish then confirm Better sound using Phase Control Problems when using the Auto Mcacc Setup02 5 minute guide Playing a sourceConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Connecting your equipment Connecting your TV and DVD player Connecting a satellite/cable receiver or other set-top box342 DVD playerConnecting a DVD/HDD recorder, VCR and other video sources Using the component video jacksUse an optical cable for the connection DVR, VCR, etcConnecting digital audio sources Use a three-way component video cableConnecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersConnecting antennas THX speaker system setupConnecting external antennas Plug the power cord into a power outletPlugging in the receiver Controls and displays Controls and displays ChapterFront panel Operating range of remote control unit Controls and displaysOver / ATT Video ConvStream Direct SleepControls and displays Remote control ReceiverInput Select 6TUNE/ST /ENTER StatusMulti OPE ShiftListening to your system Listening to your system ChapterAuto playback Listening in surround sound Standard surround soundUsing the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your systemSelecting Mcacc presets Using Stream DirectListening in stereo While listening to a source, press McaccListening to your system Choosing the input signal Using the Virtual Surround Back modeUsing Midnight and Loudness Using the Sound RetrieverUsing the tone controls Press Tone to select the frequency you want to adjustUsing the USB interface USB playbackUSB playback Chapter Basic playback controlsUSB playback Other compatibility informationAbout MPEG-4 AAC About WMAUsing the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets An introduction to RDSUsing EON Displaying RDS informationPress Disp for RDS information System Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjustSystem Setup menu MemorySurround back speaker setting Make sure ‘OK’ is selected, then press EnterManual Mcacc setup Fine Channel LevelAdjust the level of the left channel When youre finished, press ReturnSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceHow to use Professional Acoustic Calibration EQ Acoustic Calibration EQProfessional Acoustic Calibration EQ How to interpret the graphical output Using Professional Acoustic Calibration EQSelect ‘EQ Professional’ then press Enter Select an option and press EnterData Management EQ OFF Checking Mcacc preset data Copying Mcacc preset data Renaming Mcacc presets Manual speaker setup Speaker SettingClearing Mcacc presets Select a setup option Confirm your selected setup optionAdjust the level of each channel using the buttons Channel LevelSpeaker Distance Bass Peak LevelCurve THX Audio Setting Choose the X-Curve setting you wantSelect ‘THX Audio Setting’ from the Manual SP Setup menu Select ‘Return’ then press Enter to finishConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterConnecting using Hdmi Other connectionsBasic playback controls Use To move to previous/next levelsConnecting the multichannel analog inputs Second Zone speaker B setupAbout Hdmi Selecting the multichannel analog inputsSwitching the speaker system 2nd Zone setting only.1Bi-amping your front speakers Connect your speakers as shown belowOther connections Bi-wiring your speakers Connecting additional amplifiersUsing this receiver with a Pioneer plasma display LargeUsing the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay DVD player Satellite receiver, etcOther Settings Other Settings ChapterInput Setup menu Input function default and possible settingsOther Settings Other Setup menuSR+ Setup for Pioneer plasma displays OSD AdjustmentUsing other functions Using other functions ChapterSetting the AV options Setting What it does OptionsUsing other functions Making an audio or a video recording Reducing the level of an analog signalUsing the sleep timer Watching video and audio sources independentlyUsing other functions Switching the speaker impedanceResetting the system Checking your system settingsDefault system settings Setting DefaultInputs Setting the remote to control other components Selecting preset codes directlyProgramming signals from other remote controls Controlling the rest of your systemErasing one of the remote control button settings Resetting the remote control presetsConfirming preset codes Controlling the rest of your systemRenaming input source names Multi Operation and System OffDirect function Programming a multi-operation or a shutdown sequenceUsing multi operations Using System offSelect the button for the command you want to input From the menu and press EnterControlling the rest of your system Controls for TVs Controls for other componentsButtons Function Components Function ComponentsOperating other Pioneer components with this unit’s sensor Decide which component you want to use the remote sensorCH + + CHTroubleshooting PowerAdditional information Additional information ChapterOther audio problems Additional informationSettings Phase Control featureVideo Display 96 kHzRemote control SymptomRemedyUSB interface Symptom Cause Action ErrorThere is a problem with the signal path from IPod messagesAdditional information Surround sound formats DolbyWindows Media Audio 9 Professional About THX Listening modes with different input signal formats Stereo 2 channel signal formatsInput signal format Standard Auto SurroundMultichannel signal formats Pro Logic IIx Movie Neo6 CinemaPro Logic II Movie Additional information Specifications Cleaning the unitPioneer Corporation 06C00001 Printed ARB7355-A
Top Page Image Contents