Pioneer VSX-2016AV Using other functions Making an audio or a video recording

Page 58

11Using other functions

Making an audio or a video recording

You can make an audio or a video recording from the built-in tuner, or from an audio or video source

connected to the receiver (such as a CD player or TV). 1

Keep in mind you can't make a digital recording from an analog source or vice-versa, so make sure the components you are recording to/from are hooked up in the same way (see Connecting your equipment on page 11 for more on connections).

Since the video converter is not available when making recordings (from the video OUT jacks) make sure to use the same type of video cable for connecting your recorder as you used to connect your video source (the one you want to record) to this receiver. For example, you must connect your recorder using S-video if your source has also been connected using S-video.

For more information about video connections, see Connecting a DVD/HDD recorder, VCR and other video sources on page 14.

Reducing the level of an analog signal

The input attenuator lowers the input level of an analog signal when it’s too strong. You can use this if you find the that the OVER indicator is lights often, or you can

hear distortion in the sound.2

CD

 

DVR 2

 

DVD

TV

DVR1

TV CTRL

CD-R/TAPE

HDMI2

USB

 

iPod

HDMI1

TUNER

RECEIVER

 

SLEEP

VIDEO

ANALOG

 

 

SEL

ATT

 

SR+

DIMMER

MIDNIGHT/

 

 

 

LOUDNESS

•Press RECEIVER then press ANALOG ATT to switch the input attenuator on or off.

Watching video and audio sources independently

You can listen to a sound source and select a different video source on your TV.

RECEIVER SELECT

SYSTEM OFF

SOURCE

INPUT

 

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

 

CD

DVR 2

DVD TV DVR1 TV CTRL

CD-R/TAPE HDMI2 USB

iPod HDMI1 TUNER RECEIVER

1 Select the source you want to record.

Use the input source buttons (or INPUT SELECT).

•If necessary, press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component (see Choosing the input signal on page 29 for more on this).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video, DVD etc.

3 Prepare the recorder.

Insert a blank tape, MD, video etc. into the recording device and set the recording levels.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component's instruction manual if you're unsure.

4 Start recording, then start playback of the source component.

CD

 

DVR 2

 

DVD

TV

DVR1

TV CTRL

CD-R/TAPE

HDMI2

USB

 

iPod

HDMI1

TUNER

RECEIVER

 

SLEEP

VIDEO

ANALOG

 

 

SEL

ATT

 

SR+

DIMMER

MIDNIGHT/

 

 

 

LOUDNESS

•While listening to a source, press RECEIVER then press VIDEO SEL (VIDEO SELECT) to select the video source you want to watch.

Press repeatedly to cycle through the possible video sources. You can select DVD, TV, DVR1, DVR2, VIDEO

or OFF (no video signal).3

Using the sleep timer

The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.

CD

 

DVR 2

 

DVD

TV

DVR1

TV CTRL

CD-R/TAPE

HDMI2

USB

 

iPod

HDMI1

TUNER

RECEIVER

 

SLEEP

VIDEO

ANALOG

 

 

SEL

ATT

 

SR+

DIMMER

MIDNIGHT/

 

 

 

LOUDNESS

Note

1• The receiver's volume, AV parameters, and surround effects have no effect on the recorded signal.

•Some digital sources are copy-protected, and can only be recorded in analog.

•Some video sources are copy-protected. These cannot be recorded.

2The attenuator isn’t available with digital sources, or when using the Stream Direct modes.

3• The video select feature is canceled if you change the source input or switch off the receiver.

•The video select feature is not available when an HDMI input source is selected.

58

En

Page 57 Page 59
Image 58
Page 57 Page 59
Contents VSX-2016AV-S Important the Moulded Plug Risk of Electric Shock Do not OpenOperating Environment Contents Other connections Other SettingsUsing other functions Controlling the rest of your systemBefore you start Chapter FeaturesBefore you start Checking what’s in the boxBefore you start Installing the receiver Loading the batteries02 5 minute guide Chapter Automatically setting up for surround sound McaccMinute guide Introduction to home theaterMinute guide Speaker configuration in the OSDWait for the test tones to finish then confirm 02 5 minute guide Better sound using Phase ControlProblems when using the Auto Mcacc Setup Playing a sourceConnecting your equipment Chapter Connecting your equipmentRear panel When making cable connections Connecting your equipmentAbout the video converter 342 Connecting your equipment Connecting your TV and DVD playerConnecting a satellite/cable receiver or other set-top box DVD playerUse an optical cable for the connection Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks DVR, VCR, etcConnecting digital audio sources Use a three-way component video cableAbout the WMA9 Pro decoder Connecting analog audio sourcesConnecting a component to the front panel inputs Tape deck, etcConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersConnecting antennas THX speaker system setupPlug the power cord into a power outlet Connecting external antennasPlugging in the receiver Controls and displays Chapter Controls and displaysFront panel Operating range of remote control unit Controls and displaysStream Direct Over / ATTVideo Conv SleepReceiver Controls and displays Remote controlInput Select Multi OPE 6TUNE/ST /ENTERStatus ShiftAuto playback Listening in surround sound Listening to your systemListening to your system Chapter Standard surround soundTHX Games Mode Using the Home THX modesUsing the Advanced surround effects Listening to your systemListening in stereo Selecting Mcacc presetsUsing Stream Direct While listening to a source, press McaccListening to your system Choosing the input signal Using the Virtual Surround Back modeUsing the tone controls Using Midnight and LoudnessUsing the Sound Retriever Press Tone to select the frequency you want to adjustUSB playback Chapter Using the USB interfaceUSB playback Basic playback controlsAbout MPEG-4 AAC USB playbackOther compatibility information About WMASaving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets An introduction to RDSDisplaying RDS information Using EONPress Disp for RDS information Making receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Select the setting you want to adjustSystem Setup menu MemorySurround back speaker setting Make sure ‘OK’ is selected, then press EnterManual Mcacc setup Fine Channel LevelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Adjust the level of the left channelWhen youre finished, press Return Fine Speaker DistanceAcoustic Calibration EQ How to use Professional Acoustic Calibration EQProfessional Acoustic Calibration EQ Select ‘EQ Professional’ then press Enter How to interpret the graphical outputUsing Professional Acoustic Calibration EQ Select an option and press EnterData Management EQ OFFCopying Mcacc preset data Checking Mcacc preset dataRenaming Mcacc presets Speaker Setting Manual speaker setupClearing Mcacc presets Adjust the level of each channel using the buttons Select a setup optionConfirm your selected setup option Channel LevelBass Peak Level Speaker DistanceCurve Select ‘THX Audio Setting’ from the Manual SP Setup menu THX Audio SettingChoose the X-Curve setting you want Select ‘Return’ then press Enter to finishOther connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterBasic playback controls Connecting using HdmiOther connections Use To move to previous/next levelsAbout Hdmi Connecting the multichannel analog inputsSecond Zone speaker B setup Selecting the multichannel analog inputsBi-amping your front speakers Switching the speaker system2nd Zone setting only.1 Connect your speakers as shown belowUsing this receiver with a Pioneer plasma display Other connections Bi-wiring your speakersConnecting additional amplifiers LargeDisplay Using the SR+ mode with a Pioneer plasma displayPioneer plasma DVD player Satellite receiver, etcInput Setup menu Other SettingsOther Settings Chapter Input function default and possible settingsSR+ Setup for Pioneer plasma displays Other SettingsOther Setup menu OSD AdjustmentSetting the AV options Using other functionsUsing other functions Chapter Setting What it does OptionsUsing the sleep timer Using other functions Making an audio or a video recordingReducing the level of an analog signal Watching video and audio sources independentlyResetting the system Using other functionsSwitching the speaker impedance Checking your system settingsSetting Default Default system settingsInputs Programming signals from other remote controls Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemConfirming preset codes Erasing one of the remote control button settingsResetting the remote control presets Controlling the rest of your systemDirect function Renaming input source namesMulti Operation and System Off Programming a multi-operation or a shutdown sequenceSelect the button for the command you want to input Using multi operationsUsing System off From the menu and press EnterButtons Function Components Controlling the rest of your system Controls for TVsControls for other components Function ComponentsCH + Operating other Pioneer components with this unit’s sensorDecide which component you want to use the remote sensor + CHAdditional information TroubleshootingPower Additional information ChapterOther audio problems Additional informationPhase Control feature SettingsVideo Display 96 kHzSymptomRemedy Remote controlUSB interface There is a problem with the signal path from Symptom Cause ActionError IPod messagesDolby Additional information Surround sound formatsWindows Media Audio 9 Professional About THX Input signal format Standard Listening modes with different input signal formatsStereo 2 channel signal formats Auto SurroundMultichannel signal formats Neo6 Cinema Pro Logic IIx MoviePro Logic II Movie Additional information Specifications Cleaning the unitPioneer Corporation 06C00001 Printed ARB7355-A

VSX-2016AV specifications

The Pioneer VSX-2016AV is a versatile and feature-rich AV receiver that has garnered attention for its ability to deliver a cinematic experience in the home. With a focus on sound quality and user-friendly features, the VSX-2016AV stands out as a strong option for both casual listeners and serious home theater enthusiasts.

One of the primary attractions of the VSX-2016AV is its robust audio performance. It supports Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-resolution soundtracks from their Blu-ray discs. The receiver also features Pioneer's proprietary Sound Retriever technology that enhances compressed audio files, allowing for a more engaging listening experience, regardless of the source.

The VSX-2016AV does not skimp on connectivity options, offering multiple HDMI inputs and outputs to accommodate a range of devices. This includes support for 4K pass-through, making it future-proof for users with advanced video sources. In addition to HDMI, the receiver also provides options for component video, composite video, and analog audio connections, catering to a variety of setups.

Another standout feature is the integrated MCACC (Multi-Channel Acoustic Calibration System) technology. This system automatically calibrates the receiver to the acoustics of the room, ensuring that users experience optimal sound performance based on their specific environment. The result is a well-balanced audio output that enhances the overall listening experience.

With six channels of amplification, the VSX-2016AV is capable of powering a full surround sound system. The receiver provides a total power output of 100 watts per channel, which is ample for most home theater setups. It also includes various sound modes, allowing users to customize the audio output for movies, music, and gaming.

A user-friendly interface and remote control system make it easy to navigate through the various settings and options. The front panel features a clear display that provides vital information about input selection, volume levels, and audio formats. Additionally, Pioneer's iControlAV app enables smartphone control, allowing users to manage their audio settings seamlessly.

In conclusion, the Pioneer VSX-2016AV combines advanced audio technologies with a robust feature set, making it an excellent choice for home entertainment enthusiasts. Its emphasis on sound quality, along with the convenience of connectivity options and user-friendly controls, ensures that it can meet the needs of a diverse range of users. Whether for movie nights or music listening, this AV receiver stands ready to elevate the home audio experience.
Top Page Image Contents