Controls and displays | 04 |
12 PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.
13Input source buttons Press to select an input source.
14VIDEO/GAME INPUT
See Connecting a component to the front panel inputs on page 17.
15 USB interface
Connect a USB audio device for playback (see Using the USB interface on page 33).
16 MCACC SETUP MIC jack
Use to connect the supplied microphone.
17 SYSTEM SETUP
Press to access the System Setup menu (see page 38).
18 RETURN
Press to confirm and exit the current menu screen.
19 TONE
Press this button to access the bass and treble controls, which you can then adjust with the MULTI JOG dial (page 32).
20 TUNING/STATION
Use to find radio frequencies and to select preset stations (page 35).
21 TUNER EDIT
Use with the MULTI JOG dial to memorize and name stations for recall (page 35).
22 SPEAKERS
Use to change the speaker system (page 48).
Operating range of remote control unit
The remote control may not work properly if:
•There are obstacles between the remote control and the receiver’s remote sensor.
•Direct sunlight or fluorescent light is shining onto the remote sensor.
•The receiver is located near a device that is emitting infrared rays.
•The receiver is operated simultaneously with another infrared remote control unit.
30
30
7 m
23
En