Pioneer SX-A9MK2-K manual Cleaning the unit, Audio section, Miscellaneous, Accessories

Page 27

Additional information

07

Audio section

Input (Sensitivity/Impedance)

CD, TAPE, AUX . . . . . . . . . . . . . . . .200 mV/22 kΩ PHONO (MM). . . . . . . . . . . . . . . . . . 2.8 mV/47 kΩ PHONO (MC) . . . . . . . . . . . . . . . . . . 0.3 mV/100 Ω

Frequency response

CD, TAPE, AUX . . . . . . . . . 5 Hz to 100 kHz dB PHONO (MM). . . . . . . . . 20 Hz to 20 kHz ±0.2 dB PHONO (MC) . . . . . . . . . 20 Hz to 20 kHz ±0.3 dB

PHONO (MM) overload level

1 kHz, THD 0.2 % . . . . . . . . . . . . . . . . . . . . . 60 mV

PHONO (MC) overload level

1 kHz, THD 0.2 % . . . . . . . . . . . . . . . . . . . . . . 6 mV

Output (Level/Impedance)

TAPE REC . . . . . . . . . . . . . . . . . . . . . . 200 mV/1 kΩ

Tone control

Bass . . . . . . . . . . . . . . . . . . . . . . .±10 dB (100 Hz) Treble . . . . . . . . . . . . . . . . . . . . . .±10 dB (10 kHz)

Signal-to-Noise Ratio (IHF SHORTED, A-Network)

CD, TAPE, AUX (200 mV input). . . . . . . . . . 103 dB PHONO (MM, 2.8 mV input) . . . . . . . . . . . . . 80 dB PHONO (MC, 0.2 mV input) . . . . . . . . . . . . . 70 dB

FM Tuner Section

Frequency Range. . . . . . . . .87.5 MHz to 108 MHz Usable Sensitivity . . . . . . . . . Mono:13.2 dBf, IHF (1.3 µV/ 75 Ω)

50 dB Quieting Sensitivity. . . . . . . Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio. . . .Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf)

Distortion . . . . . . . . . . . . . . . Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity . . . 60 dB (400 kHz) Stereo Separation . . . . . . . . . . . . . . 40 dB (1 kHz) Frequency Response . . . . . . . . . . .30 Hz to 15 kHz (±1 dB)

Antenna Input . . . . . . . . . . . . . . 75 Ω unbalanced

AM Tuner Section

Frequency Range . . . . . . . . . 530 kHz to 1700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . 350 µV/m Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . .Loop antenna

Miscellaneous

Power requirements. . . . . AC 120 V, 50 Hz/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . 200 W Power consumption (standby) . . . . . . . . . . 0.8 W Dimensions

. . . . . . . 420 mm (W) x 113 mm (H) x 369 mm (D)

(16 9/16 in. (W) x 47/16 in. (H) x 14 17/32 in. (D)) Weight (without package)

. . . . . . . . . . . . . . . . . . . . . . . . .11.5 kg (25 lb. 6 oz.)

Accessories

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AAA/IEC R03 dry cell batteries. . . . . . . . . . . . . 2 AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna. . . . . . . . . . . . . . . . . . . . . . . . . . 1 Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating instructions (This document)

Note

Specifications and the design are subject to possible modifications without notice, due to improvements.

Cleaning the unit

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

Published by Pioneer Corporation.

Copyright © 2009 Pioneer Corporation.

All rights reserved.

English

27

En

Image 27
Contents Operating Instructions Mode d’emploi Operating Environment POWER-CORD Caution Ventilation Caution   We Want You Listening For a LifetimeContents What’s in the box FeaturesBefore you start Before you start ChapterInstalling the receiver Before you start Inserting the batteryMaking cable connections Connecting upConnecting up Chapter Connecting audio componentsConnecting antennas Connecting upTo improve FM reception Connecting the speakersUsing external antennas Bare wire connectionsFig. a PluggingFront panel Power OFF ON1Controls and displays Controls and displays ChapterRetriever Controls and displays Remote controlVolume +  TUNE/PRESET /ENTERUsing the remote control Controls and displaysDisplay Listening to your system Start recording, then start playback of the source component Listening to your system Making an audio recordingNaming station presets Using the tunerUsing the tuner Chapter Saving station presetsUsing the tuner Listening to station presetsPress / to select the station preset you want Other connections Other connections ChapterListening to Satellite Radio Saving channel presets Other connectionsListening to XM Radio Start playback of a source on your computer Other connections Using the USB interfaceConnecting an additional amplifier Pioneer Other connections Connecting an IR receiverOperating other Pioneer components with this unit’s sensor ComponentSwitching components on and off using the 12 volt trigger Troubleshooting Additional informationAdditional information Chapter Amplifier section SpecificationsAdditional information XM radio messagesMiscellaneous Cleaning the unitAccessories Audio sectionMilieu de fonctionnement Avertissement Précaution DE VentilationTable des matières Contenu de la boîte PréparatifsPréparatifs Chapitre Caractéristiques01 Préparatifs Insertion de la pile Installation de l’ampli-tunerAudio RaccordementRaccordement Chapitre Raccordements des câblesRaccordement Connecter les antennesFixez l’antenne cadre AM au support intégré Pour améliorer la réception AM Raccordement des enceintesUtilisation des antennes externes Pour améliorer la réception FMBranchement Commandes et afficheur Commandes et afficheur ChapitrePanneau avant Commandes et afficheur Télécommande   TUNE/PRESET /ENTERMute Commandes et afficheur Utilisation de la télécommandeAfficheur Écoute de votre système Préparez l’enregistreur Sélectionnez la source que vous souhaitez enregistrerInput Selector Préparez la source que vous souhaitez enregistrerEnregistrement des stations préréglées Utilisation du syntoniseurUtilisation du syntoniseur Chapitre Écoute de la radioÉcoute de stations préréglées Utilisation du syntoniseurRaccordement de votre ampli-tuner de radio XM Autres raccordementsAutres raccordements Chapitre Écoute de la radio par satelliteAutres raccordements Écoute de la radio XMEnregistrement des canaux préréglés Autres raccordements Utilisation de l’interface USB Appuyez sur USB pour sélectionner l’entrée USBCommencez la lecture d’une source sur votre ordinateur Raccordement d’un amplificateur supplémentaire Raccordez la prise IR in d’un autre Autres raccordements Raccordement d’un récepteur IRComposant Autre queSpeaker R Informations supplémentaires Informations supplémentaires ChapitreGuide de dépannage Section amplificateur Informations supplémentairesSpécifications Messages de radio XMDivers AccessoiresNettoyage de l’unité Section audioPioneer Corporation
Related manuals
Manual 2 pages 49.35 Kb

SX-A9MK2-K specifications

The Pioneer SX-A9MK2-K is a high-performance integrated amplifier designed to deliver superior sound quality and functionality for audiophiles and home theater enthusiasts alike. This robust amplifier combines cutting-edge technology with elegant design, making it a standout choice for anyone looking to enhance their audio experience.

One of the most remarkable features of the SX-A9MK2-K is its powerful amplification. It boasts a substantial output of 100 watts per channel, allowing it to drive a wide range of speakers with ease. This power ensures that even the most demanding audio tracks are reproduced with clarity, depth, and an impressive dynamic range. The amplifier's Class D technology further enhances efficiency without compromising sound quality, ensuring optimal performance while minimizing energy consumption.

The SX-A9MK2-K incorporates Pioneer's top-of-the-line Direct Energy HD technology, which significantly improves audio fidelity. This proprietary technology eliminates unnecessary circuitry, resulting in a cleaner signal path that faithfully reproduces the original sound. This means that listeners can enjoy their favorite tracks with precision, capturing every detail and nuance.

Additionally, the amplifier features a wide array of input options, including digital and analog connections. With multiple HDMI inputs, optical inputs, and analog RCA connections, users can effortlessly connect various audio sources—from DVD players and gaming consoles to turntables and streaming devices. The inclusion of Bluetooth connectivity adds the convenience of wireless audio streaming, allowing users to play music directly from their smartphones or tablets.

Another standout characteristic of the SX-A9MK2-K is its advanced room calibration technology, which optimizes sound performance based on the specific characteristics of the listening environment. This feature ensures a balanced audio experience, adjusting the sound output to compensate for acoustic anomalies in the room.

The design of the SX-A9MK2-K is both stylish and functional. Its sleek black finish and intuitive layout are aesthetically pleasing, making it a perfect fit for any home audio setup. The well-illuminated display and user-friendly controls simplify navigation through settings and playback options.

In summary, the Pioneer SX-A9MK2-K is a remarkable integrated amplifier that combines power, efficiency, and advanced technology to provide an immaculate audio experience. With its versatile connectivity options, room calibration capabilities, and elegant design, it stands as an excellent choice for both music lovers and home theater aficionados seeking to elevate their sound system.