Pioneer VSX-52TX manual Multi Room Setup, Volt Trigger Setup

Page 67

Other Settings

Multi Room Setup

• Default setting: VARIABLE / Setting 1

If you’ve made multi-room connections (see Multi-room listening on page 58) you may need to specify your volume setting and IR receiver type.

1Select ‘Multi Room Setup’ from the Other Setup menu.

6.

Other Setup

 

[

a. DRC Setup

]

[

b. Dual Mono Setup

]

[

c . LFE ATT Setup

]

[

d. SR+ Setup

]

[

e . Multi Room Setup

]

[

f . 12V Trigger Setup

]

2 Select the volume level setting.

6e. Multi Room Setup

6f. Multi Room Setup

Volume Level

Volume Level

[

VARIABLE

]

[

FIXED

]

IR Setting

 

 

IR Setting

 

 

 

[Setting 1]

[Setting 1]

11

Note

•Some IR receivers may not work with this receiver. Check with your audio dealer for more information.

12 Volt Trigger Setup

• Default setting: OFF (all components)

After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 62), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below.

1Select ‘12V Trigger Setup’ from the Other Setup menu.

6.

Other Setup

 

[

 

a. DRC Setup

]

[

 

b. Dual Mono Setup

]

[

 

c . LFE ATT Setup

]

[

 

d. SR+ Setup

]

[

 

e . Multi Room Setup

]

[

 

f . 12V Trigger Setup

]

CAUTION:If the "FIXED"

CAUTION:If the "FIXED"

position is chosen, the

position is chosen, the

volume will be loud.

volume will be loud.

•VARIABLE – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•FIXED – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls.

Caution

•With the FIXED setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.

3 Select the type of IR receiver you’re using.

6e. Multi Room Setup

Volume Level

[ VARIABLE ]

IR Setting

[ Setting 1 ]

•Setting 1 – Use this setting for most IR receivers.

•Setting 2 – Use this setting if the IR receiver you’re using doesn’t seem to work after selecting Setting 1.

4When you're finished, press RETURN. You will return to the Other Setup menu.

2Select an input function and choose the setting that you want.

This should be the input function, that when selected, switches on the 12 volt trigger.

6f. 12V Trigger Setup

6f. 12V Trigger Setup

DVD/LD

[

 

]

DVD/LD

[

 

]

OFF

ON

TV/SAT

[

OFF

]

TV/SAT

[

OFF

]

DVR

[ OFF ]

DVR

[ OFF ]

VIDEO1

[ OFF ]

VIDEO1

[ OFF ]

VIDEO2

[ OFF ]

VIDEO2

[ OFF ]

TUNER

[ OFF ]

TUNER

[ OFF ]

CD-R

[ OFF ]

CD-R

[ OFF ]

CD

[ OFF ]

CD

[ OFF ]

•OFF – 12 volt trigger is not activated for the selected component.

•ON – 12 volt trigger is activated for the selected component.

3Repeat for as many input functions as you would like to set.

4When you're finished, press RETURN.

You will return to the Other Setup menu.

67

En

Page 66 Page 68
Image 67
Page 66 Page 68
Contents VSX-52TX Information to User Wash hands after handlingImportant Safety Instructions Contents Additional information Other SettingsControlling the rest of your system Other connectionsChecking what’s in the box FeaturesBefore you start Before you start ChapterBefore you start Ventilation Installing the receiverLoading the batteries Listening to Surround Sound Minute guide02 5 minute guide Chapter Introduction to home theaterConnect your speakers Minute guideFront speakers Surround speakers02 5 minute guide Enter Make sure ‘Normal SB’ is selected then pressFollow the instructions on-screen Other problems when using the Auto Mcacc Setup Checking the settings on your DVD or other playerPlaying a source Connecting up Chapter Connecting upAbout cable types When making cable connections Connecting upAbout the video converter CD recorder DVD or LD player CD player Connecting up Connecting digital audio componentsTip Connecting up Connecting analog audio componentsConnecting multichannel analog components Output jacksDVD or LD player Connecting up Connecting video componentsConnecting to the front panel video terminal TV tunerAM loop antenna Connecting up Connecting antennasFM wire antenna Using external antennasFront speakers Connecting the speakersConnecting up Overhead view of speaker setupOperating other Pioneer components Power cord cautionView of 7.1 channel speaker setup AC outletFront panel Listening Mode SelectControls and displays Controls and displays ChapterControls and displays Controls and displays Display Sleep StereoMono TunedControls and displays Remote control Tuner Display 6TUNE/ST +/- /ENTERDTV ON/OFF DTV InfoOperating range of remote control unit Auto playback Listening to your systemListening to your system Chapter Listening in surround soundPRO Logic Using the Home THX modesUsing the Advanced surround effects Listening to your systemPress EFFECT/CH SEL again to adjust other settings Dolby Pro Logic IIx Music settingsNeo6 Music settings Use the +/- buttons to adjust the settingListening to your system Listening with Acoustic Calibration Choosing the input signalTo cycle the surround back channel options Listening to your system Using the surround back channelExtended mode Press Extended Mode front panel repeatedlyMode VirtualSB Listening to your system Using the Virtual Surround BackTo cycle the virtual surround back channel options Enhancing dialog Using the tone controlsPress SHIFT+DIALOG E to switch dialog enhancement on or off Press Tone to select the frequency you want to adjust30 min Using the sleep timerListening to your system Playing other sources Selecting the multichannel analog inputsSurround back speaker setting System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuSelect ‘MANUAL MCACC’ from the System Setup menu System Setup menuManual Mcacc speaker setup Select the surround back speaker settingFine Channel Distance Fine Channel LevelCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Checking your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manuallyFront Align Select the setting you want to check Manual speaker setupSelect ‘Manual SP Setup’ then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menu Speaker SettingChannel Level Crossover NetworkSpeaker Distance Select ‘Speaker Distance’ from the Manual SP Setup menuListening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationAbcdefghijklmnopqrstuvwxyz Using the tuner Saving station presetsNaming station presets Listening to station presetsPrepare the recorder Making recordingsMaking recordings Chapter Making an audio or a video recordingControlling the rest of your system Chapter Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemPress the Receiver button to exit and store the operations Use cursor left/right to select Learn then press EnterConfirming preset codes Erasing all of the remote control presetsDirect function Disc Controlling the rest of your system Controls for TVsInput SelectSHIFT+ CD/MD/CD-R/DVD/LDShift + DVD Controlling the rest of your systemEnter Guide HDDOther connections Chapter Second Zone speaker B setupSwitching the speaker system Other connectionsOther connections Bi-amping your front speakers Bi-wiring your speakersFront left Speaker Making multi-room connections Using the sub room controlsUsing the remote control in the sub room Other connections Multi-room listeningPress the Multi Room ON/OFF button on the front panel Using the front panel multi-room controlsUse the Master Volume dial to adjust the volume Other connectionsUsing this receiver with a Pioneer plasma display Other connections Connecting additional amplifiersPioneer plasma Using the SR+ mode with a Pioneer plasma displayDVD player Page Assigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuAssigning the component video inputs Other SettingsOther Setup menu Select ‘Other Setup’ then press EnterChoose the setting that you want Dynamic Range Control SetupDual Mono Setup Select ‘DRC Setup’ from the Other Setup menuSelect ‘SR+ Setup’ from the Other Setup menu LFE Attenuator SetupSR+ Setup for Pioneer plasma displays Select ‘LFE ATT Setup’ from the Other Setup menuVolt Trigger Setup Multi Room SetupAdditional information Chapter TroubleshootingPower Additional informationNo sound Additional informationDigital inputs on Other audio problemsAudio components on VideoDisplay SettingsExtended Auto setting, the EX Remote controlSwitching the speaker impedance Additional information Resetting the main unitPress System Setup to confirm Dolby Additional information Surround sound formatsAdditional information About THX Cleaning the unit Additional information SpecificationsOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-52TX specifications

The Pioneer VSX-52TX is a remarkable AV receiver that stands out in the realm of home theater systems, well-known for its high-quality sound performance and an array of advanced features. Designed to cater to the needs of audiophiles and casual listeners alike, the VSX-52TX integrates cutting-edge technologies that elevate the home entertainment experience.

One of the prominent features of the VSX-52TX is its 7.1 channel amplification system, providing a robust output of 120 watts per channel. This ensures that users can enjoy crystal-clear audio across various setups, whether it’s a simple stereo configuration or a full surround sound experience. The receiver supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive soundstage that brings movies, music, and games to life.

Incorporating Advanced MCACC (Multi-Channel Acoustic Calibration System), the VSX-52TX offers automatic speaker calibration, which fine-tunes the surround sound experience based on the unique acoustics of your room. This technology analyzes the speaker layout and optimizes the audio output for consistent and dynamic sound quality.

Another defining characteristic of the VSX-52TX is its extensive connectivity options. Equipped with multiple HDMI inputs, the receiver can handle various high-definition devices, making it easy to connect Blu-ray players, gaming consoles, and streaming devices. The inclusion of HDMI version 1.4 also allows for 3D video pass-through and Audio Return Channel (ARC), enhancing its versatility for modern home theaters.

The user-friendly interface of the VSX-52TX is complemented by its compatibility with network streaming. It supports popular services like Spotify, Pandora, and vTuner, enabling users to access their favorite content with ease. Additionally, the built-in USB port allows for easy playback of music files from USB drives.

The receiver showcases a sleek, modern design that integrates seamlessly into any home decor. The informative front display ensures that users can easily navigate through settings and features, while the remote control provides convenient access to all functionalities from a distance.

Overall, the Pioneer VSX-52TX is a powerful and versatile AV receiver that combines sophisticated technology with user-friendly features, making it an excellent choice for anyone looking to enhance their home theater experience. With superior audio capabilities, network streaming options, and advanced calibration technologies, the VSX-52TX continues to be a prominent choice for both music enthusiasts and movie lovers.
Top Page Image Contents