Pioneer VSX-LX70 manual Other Settings, Multi Channel Input Setup, Zone Audio Setup

Page 66

10Other Settings

Multi Channel Input Setup

You can adjust the level of the subwoofer for a multi- channel input. Also, when the multi-channel input is selected as an input source, you can display the video images of other input sources. In the Multi Channel Input Setup, you can assign a video input to the multi-channel input.

1Select ‘Multi Ch In Setup’ from the Other Setup menu.

DVD/LD

- 55.0dB

8. Other Setup

 

a. Multi Ch In Setup

b. ZONE Audio Setup

c. SR+ Setup

d. HDMI Control Setup

e . OSD Adjustment

:Return

2Select the ‘SW Input Gain’ setting you want.

•0dB – Outputs sound of the subwoofer at the level originally recorded on the source.

•+10dB – Outputs sound of the subwoofer at the level increased by 10 dB.

DVD/LD

- 55.0dB

8a. Multi Ch In Setup

 

 

SW Input Gain

 

 

0dB

Video Input [ DVD ]

:Finish

3Select the ‘Video Input’ setting you want. When the multi-channel input is selected as an input source, you can display the video images of other input sources. The video input can be selected from the following: DVD/LD, BD, TV/SAT, DVR/VCR1, DVR/ VCR2, VIDEO/GAME1, VIDEO/GAME2.

DVD/LD

- 55.0dB

8a. Multi Ch In Setup

SW Input Gain

[ 0dB ]

Video Inpu

 

 

BD

:Finish

4When you’re finished, press RETURN. You will return to the Other Setup menu.

ZONE Audio Setup

If you’ve made MULTI-ZONE connections (see MULTI- ZONE listening on page 56) you may need to specify your volume setting.

1Select ‘ZONE Audio Setup’ from the Other Setup menu.

 

DVD/LD

- 55.0dB

 

 

DVD/LD

- 55.0dB

 

8. Other Setup

 

 

 

 

 

8b. ZONE Audio Setup

 

 

 

a. Multi Ch In Setup

 

 

ZONE 2 / RECSEL Setting

 

 

 

 

 

ZONE 2 Volume

 

RECSEL

 

 

 

 

b. ZONE Audio Setup

 

 

 

 

Level

 

 

 

 

c. SR+ Setup

 

 

 

 

[

– – – ]

 

 

d. HDMI Control Setup

 

 

 

 

 

 

 

 

 

e . OSD Adjustment

 

 

 

 

 

 

 

 

 

 

 

 

 

:Return

 

 

 

 

:Finish

 

 

 

 

 

 

 

 

 

 

 

 

 

2Select the ‘ZONE 2 / RECSEL Setting’ you want. You can select the ZONE 2 or RECSEL setting.

•ZONE 2 – Sound is output from MULTI ZONE & SOURCE ZONE2 OUT jack.

•RECSEL – Sound is output from the CD-R/TAPE OUT, DVR/VCR1 OUT or DVR/VCR2 OUT jack. For details, see Playing a different source when recording on page 70.

3Select the volume level setting.1

•Variable – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls. (This setting is not available if the surround back system setting is set to ZONE 2.)

With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub zone at first and then experiment to find the correct level.

4When you’re finished, press RETURN. You will return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of function settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 59 and Using the SR+ mode with a Pioneer plasma display on page 60.

1 Select ‘SR+ Setup’ from the Other Setup menu.

 

DVD/LD

- 55.0dB

 

 

DVD/LD

- 55.0dB

 

8. Other Setup

 

 

 

 

 

8c. SR+ Setup

 

 

 

 

 

a. Multi Ch In Setup

 

 

PDP Volume Control

 

 

b. ZONE Audio Setup

 

 

 

OFF

 

 

 

 

c. SR+ Setup

 

 

 

 

 

Monitor Out Connect

 

 

d. HDMI Control Setup

 

 

 

 

 

 

e . OSD Adjustment

 

 

 

 

[

OFF ]

 

 

 

:Return

 

 

 

:Finish

 

 

 

 

 

 

 

 

 

 

 

 

Note

1 If you selected ZONE 2 in the Surround back speaker setting on page 40, you won’t be able to change the volume level.

66

En

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Operating Instructions Operating Environment For Australia ModelChanging the frequency step Changing the TV format settingVoltage selector 10kContents Other connections Other SettingsUsing other functions Hdmi ControlBefore you start Chapter Installing the receiverBefore you start Checking what’s in the boxIntroduction to home theater Minute guideMinute guide Chapter Listening to Surround SoundProgress report is displayed on-screen while Speaker configuration in the OSDSwitch on the receiver and your TV Receiver outputs test tones to determine the speakersPlaying a source Problems when using the Auto Mcacc SetupMinute guide Select the input source you want to playPhase Control indicator on the front panel lights Using Phase ControlPress Phase Phase Control to select Phase Control 02 5 minute guideFullband PHASE.3 Using Full Band Phase ControlPress Phase Phase Control to select Tweeter Midrange WooferConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Connecting your equipment Connecting your TV and DVD player Connect using a standard video cable or an S-video cableConnecting a satellite/cable receiver or other set-top box Use an optical cable for the connectionConnecting a DVD/HDD recorder, VCR For a second recorder, use the DVR/VCR2 in inputsUse a three-way component video cable Connecting digital audio sourcesAbout the WMA9 Pro decoder This unit has an on-board Windows Media AudioConnecting your equipment Connecting analog audio sources TV game, video camera, etcConnecting your equipment Installing your speaker system Connecting the speakersCenter Bare wire connections Placing the speakersAM loop antenna Connecting antennasTHX speaker system setup Assemble the stand as shown in the illustration.1Using the antenna adapter FM wire antennaConnecting external antenna to improve FM reception Antenna AdapterPlugging in the receiver Using an external antenna to improve AM receptionAC power cord and converter plug use Region Plug typeFront panel Controls and displaysControls and displays Chapter STANDBY/ONOperating range of remote control unit Controls and displaysControls and displays Display Input Select Controls and displays Remote controlReceiver 6TUNE/ST /ENTERShift StatusMulti OPE SourceAuto playback Listening to your systemListening to your system Chapter Listening in surround soundTHX Games Mode Using the Home THX modesUsing the Advanced surround effects Listening to your systemListening in stereo Using Front Stage Surround AdvanceUsing Stream Direct TipUsing surround back channel processing Listening to your system Selecting Mcacc presetsChoosing the input signal While listening to a source, press Mcacc Mcacc PositionUsing the Virtual Surround Back mode BD Tvctrl Using the tuner Using the tuner ChapterListening to the radio Listening to station presets Using the tuner Saving station presetsNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Select the setting you want to adjustPoint System Setup menuMake sure ‘Normal default’ is selected,2 select an Front AlignIf necessary, confirm the speaker configuration in the OSD.1 Select ‘Surr Back System’ from the System Setup menu Surround back speaker settingManual Mcacc setup Select the surround back speaker settingAdjust the level of the left channel Select ‘Manual MCACC’ from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu When you’re finished, press ReturnFine Speaker Distance Select ‘Fine SP Distance’ from the Manual Mcacc setup menuSelect ‘Standing Wave’ from the Manual Mcacc setup menu Standing WaveHow to interpret the graphical output Acoustic Calibration EQ AdjustHow to use Acoustic Calibration EQ Professional Acoustic Calibration EQ ProfessionalUsing Acoustic Calibration EQ Professional Select ‘EQ Professional’ then press EnterSelect an option and press Enter Full Band Phase Control Select ‘Data Management’ from the System Setup menu Checking Mcacc preset dataSelect ‘FULL Band Phase CTRL’ from the System Setup menu Data ManagementCopying Mcacc preset data Renaming Mcacc presetsClearing Mcacc presets Select ‘Manual SP Setup’ then press Enter System Setup menu Manual speaker setupSpeaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuChannel Level Speaker DistanceTHX Audio Setting CurveOther connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterOther connections Connecting using HdmiWatching photos and video content Basic playback controlsAbout Hdmi Use the Input Select button to select Multi CH Switching the speaker systemSelecting the multichannel analog inputs Select ‘Speaker B’ from the ‘Surr Back System’ menuBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Making MULTI-ZONE connections Other connections Connecting additional amplifiersMULTI-ZONE listening Sub zone ZoneMULTI-ZONE listening options Basic MULTI-ZONE setup ZoneSecondary MULTI-ZONE setup Zone Sub Zone Input sources availableConnecting an IR receiver Using the MULTI-ZONE controlsMULTI-ZONE remote controls Using this receiver with a Pioneer plasma display Switching components on and off using the 12 volt triggerCloset or shelving unit Non-Pioneer IRcomponent Display Using the SR+ mode with a Pioneer plasma displayPioneer plasma Satellite receiver, etcWhen the receiver is ready for transmission, Start Other connections Connecting a PC for Advanced Mcacc outputAdvanced Mcacc output using your PC Select ‘Output PC’ and press EnterHdmi Control Hdmi Control ChapterMaking the Hdmi Control connections Before using synchronization Hdmi Control Setting the Hdmi optionsSynchronized amp mode About Hdmi ControlOther Settings Other Settings ChapterInput Setup menu Other Setup menu Input Input Terminals Source DigitalVideo Zone Audio Setup Other SettingsMulti Channel Input Setup SR+ Setup for Pioneer plasma displaysOSD Adjustment Select the ‘PDP Volume Control’ setting you wantSelect ‘OSD Adjustment’ from the Other Setup menu Setting the Audio options Using other functionsUsing other functions Chapter Setting What it does OptionsUsing other functions Setting the Video optionsPress V Parameter Video Parameter Use Select the source you want to record Playing a different source when recordingMaking an audio or a video recording Prepare the source you want to recordUsing the sleep timer Reducing the level of an analog signalSwitching the speaker impedance Dimming the displayDefault system settings Using other functions Checking your system settingsResetting the system Setting DefaultListening Mode HP Neo6 Options Center Image All Inputs Listening Mode 2 chListening Mode x ch Channel level M1-M6 Speaker Distance M1-M6Setting the remote to control other components Controlling the rest of your systemControlling the rest of your system Chapter Confirming preset codes Erasing one of the remote control button settingsResetting the remote control presets Controlling the rest of your systemDirect function Renaming input source namesMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing multi operations Using System offControls for TVs Controls for other components Buttons Function ComponentsFunction Components Disp SHIFT+ Operating other Pioneer components with this unit’s sensorDecide which component you want to use the remote sensor HDDAdditional information TroubleshootingPower Additional information ChapterOther audio problems Additional informationPhase Control feature VideoSettings Professional Calibration EQ graphical outputDisplay Remote control Symptom Cause Action IPod messagesAdditional information Surround sound formats DolbyAbout THX Windows Media Audio 9 ProfessionalAbout Neural Surround Stereo 2 channel signal formats Input signal format StandardAuto Surround Multichannel signal formats Pro Logic llx Movie a Pro Logic llx MOVIE+THX a THX Games Mode aMovie a MOVIE+THX a Movie aInput signal format Sacd Direct VSX-LX70 or Straight decoding VSX-LX60Additional information Specifications Additional information Cleaning the unit FeaturesOur philosophy Pioneer Authorized Distributors DCDiIPod Ready Pioneer Corporation
Top Page Image Contents