Pioneer VSX-LX70 Acoustic Calibration EQ Adjust, Acoustic Calibration EQ Professional, Start

The System Setup menu 07

Acoustic Calibration EQ Adjust

Acoustic Calibration Equalization is a kind of room equalizer for your speakers (excluding the subwoofer). It works by measuring the acoustic characteristics of your room and neutralizing the ambient characteristics that can color the original source material (providing a ‘flat’ equalization setting). If you’re not satisfied with the adjustment provided in Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 37, you can also adjust these settings manually to get a frequency

balance that suits your tastes.1

Tip

•Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker balance seems uneven, you can raise or lower channel levels using test tones with the TRIM

feature. Use to select TRIM then use to raise or lower the channel level for the current speaker.

4 When you’re finished, press RETURN.

You will return to the Manual MCACC setup menu.

1Select ‘EQ Adjust’ from the Manual MCACC setup menu.

DVD/LD	- 55.0dB
3. Manual MCACC

a. Fine Channel Level

b. Fine SP Distance

c. Standing Wave

d. EQ Adjust

e . EQ Professional

:Return

2Confirm that the MCACC preset shown in the display is the one you want to adjust, then select

START.

DVD/LD- 55.0dB

3d. EQ Adjust

MCACC:M1. MEMORY 1

[ START ]

ENTER:Next :Cancel

3Select the channel(s) you want and adjust to your liking.

DVD/LD			- 55.0dB
3d. EQ Adjust
MCACC : M1			63Hz [	0.0]
Ch	[SBL]		125Hz [	0.0]
dB			250Hz [	0.0]
			500Hz [	0.0]
			1kHz	0.0
			2kHz [	-1.0]
			4kHz [	-2.0]
63	125 250 500 1k 2k 4k 8k 16k	TRM	8kHz [	-4.5]
			16kHz [	-7.0]
	:Finish		TRIM [	0.0]

Use the	buttons to select the channel.
Use the	buttons to select the frequency and

to boost or cut the EQ. When you’re finished, go back to

the top of the screen and use the	buttons to select
the next channel.

•The OVER! indicator shows in the display if the frequency adjustment is too drastic and might distort. If this happens, bring the level down until OVER! disappears from the display.

Note

Acoustic Calibration EQ Professional

This setup minimizes the unwanted effects of room reverberation by allowing you to calibrate your system based on the direct sound coming from the speakers. It can also provide you with a graphical output of the

frequency response of your room.2

How to use Acoustic Calibration EQ Professional

If you find that lower frequencies seem overly reverberant in your listening room (i.e. it sounds ‘boomy’), or that different channels seem to exhibit different reverb characteristics, select EQ Pro. & S-Wave(or ALL) for the Custom Menu setting in Automatic MCACC (Expert) on page 37 to calibrate the room automatically. This should provide a balanced calibration that suits the characteristics of your listening room.

If you still aren't satisfied with the results, the manual Advanced EQ setup (below) provides a more customized calibration of your system using the direct sound of the speakers. This is done with the help of a graphical output that can be displayed on-screen, or using a computer (with software available from Pioneer — see Connecting a PC for Advanced MCACC output on page 61).

How to interpret the graphical output

The graph shows decibels on the vertical axis and time (in milliseconds) on the horizontal axis. A straight line indicates a flat-response room (no reverb), whereas a sloping line indicates the presence of reverberation when outputting test tones. The sloping line will eventually flatten out when the reverberant sound stabilizes (this usually takes about 100 ms or so).

1When EQ Adjust is selected for a MCACC preset memory where EQ is set to OFF in the Audio parameter, EQ ON is automatically selected.

2This system allows you to customize your system calibration with the help of a graphical output that can be displayed on-screen, or using a computer (with software available from Pioneer—see Connecting a PC for Advanced MCACC output on page 61 for more on this).

43

En