Pioneer VSX-LX70 manual Other Settings Chapter, Input Setup menu

10Other Settings

Chapter 10:

Other Settings

The Input Setup menu

You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings below). In this case, you need to tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond to the components you’ve connected.

5 Select the input(s) to which you’ve connected your

component.

For example, if your DVD player only has an optical

output, you will need to change the DVD/LD input

function’s Digital In setting from COAX 1 (default) to the

optical input you’ve connected it to. The numbering

(OPT1 to 4) corresponds with the numbers beside the

inputs on the back of the receiver.

• If you change the setting to an input that has been

previously assigned to another function (for example,

TV) then the setting for that function will

RECEIVER INPUT SELECT

CD CD-R

DVD TV

HOME MEDIA

DVR2 GALLERY

DVR1 iPod

SYSTEM OFF

SOURCE	D.ACCESS			CLASS
		CLEAR		DISC
		+10	CH	ENTER
			LEVEL
	A PARAMETER			V PARAMETER
	TOP MENU			MENU T.EDIT
			TUNE
	BAND	ST		ST
	SETUP		ENTER	RETURN
			TUNE
	PROGRAM		TV CONTROL
HDMI

BD	TVCTRL
	TV VOL	INPUT	TV CH	VOL
	ZONE2/3	SELECT
TUNER	RECEIVER

automatically be switched off.

• If your component is connected via a component

video cable to an input terminal other than the

default, you must tell the receiver which input

terminal your component is connected to, or else you

may see the S-video or composite video signals

instead of the component video signals.1

6 When you’re finished, select ‘Next’ to continue to

1Switch on the receiver and your TV. Use the RECEIVER button to switch on.

2Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use the buttons and ENTER to navigate through the

screens and select menu items. Press RETURN to confirm and exit the current menu.

3Select ‘Input Setup’ from the System Setup menu.

	DVD/LD			- 55.0dB		DVD/LD		- 55.0dB
	System Setup MENU					7. Input Setup		(1/2)
	1		. Auto MCACC			Input		DVD
2			. Surr Back System			Digital In	[	COAX-1	]
3			. Manual MCACC			HDMI Input	[	Input-1	]
4			. FULL BAND PHASE CTRL			Component In [		Comp-3	]
5			. Data Management			S-Video In	[	Input-1	]
6			. Manual SP Setup
		7	. Input Setup
8			. Other Setup		(		Next	)
				:Exit
								:Finish

4Select the input function that you want to set up. The default names correspond with the names next to the terminals on the rear panel (such as DVD/LD or VIDEO/ GAME 1) which, in turn, correspond with the names on the remote control.

	DVD/LD		- 55.0dB		DVD/LD			- 55.0dB
	7. Input Setup		(1/2)		7. Input Setup			(2/2)
	Input		DVD		(	Back)
	Digital In	[	COAX-1	]	DVD/LD
	HDMI Input	[	Input-1	]	Input Name		Rename
	Component In [		Comp-3	]	12V Trigger1	[		OFF	]
	S-Video In	[	Input-1	]	12V Trigger2	[		OFF	]
					PDP In (SR+)	[		OFF	]
(		Next	)		ENTER : Next
			:Finish					:Finish

the next screen.

The second screen of the Input setup has three optional

settings:

• Input Name – You can choose to rename the input

function for easier identification. Select Rename to

do so, or Default to return to the system default.

• 12V Trigger 1 / 2 – After connecting a component to

one of the 12 volt triggers (see Switching components

on and off using the 12 volt trigger on page 59), select

MAIN, ZONE 2, ZONE 3 or OFF for the

corresponding trigger setting to switch it on

automatically along with the (main or sub) zone

specified.

• PDP In (SR+) – To control certain functions on this

receiver from a plasma display, select the display

input to which you’ve connected the receiver.2

7 When you’re finished, press RETURN.

You will return to the System Setup menu.

Note

1For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options on page 69), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.

2You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite from the setup in Using this receiver with a Pioneer plasma display on page 59). Note that to control this receiver using the remote, you will have to point it at the plasma display’s remote sensor after making this connection.

64

En