Pioneer VSX-01TXH manual Using this receiver with a Pioneer flat panel TV

08Other connections

Switching components on and off using the 12 volt trigger

You can connect components in your system (such as a screen or projector) to this receiver so that they switch on or off using 12 volt triggers when you select an input function. However, you must specify which input functions switch on the trigger using the The Input Setup menu on page 69. Note that this will only work with components that have a standby mode.

12V

TRIGGER

Using this receiver with a Pioneer flat panel TV

If you have a Pioneer flat panel TV, you can use an SR+

cable1 to connect it to this receiver and take advantage of various convenient features, such as automatic video input switching of the flat panel TV when the input is

changed.2

Pioneer flat panel TV

CONTROL

OUT

	IN 2			R
		IR
	(DVR1)
		ZONE2	IN
IN 2	ASSIGNABLE
					MULTI CH IN
	1 - 2
ASSIGN-		OUT
ABLE
				FRONT	CENTER	SURROUND SURROUND
1 - 2	OUT
			1	L
		12 V TRIGGER
		(OUTPUT	2
DIGITAL
		12 V	TOTAL	R
		50 mA MAX)
					SUBWOOFER

VSX-01TXH

•Connect the 12 V TRIGGER jack of this receiver to the 12 V trigger of another component.

Use a cable with a mono mini-plug on each end for the connection.

•The trigger maximum power is DC OUT 12 V/50 mA (50 mA total for terminals 1 and 2).

After you’ve specified the input functions that will switch on the trigger, you’ll be able to switch the component on or off just by pressing the input function(s) you’ve set on The Input Setup menu on page 69.

VSX-01TXH
HDMI			S-				OUT		IN
	COAXIAL		VIDEO IN	IN	OUT	IN
	ASSIGNABLE 1 - 2
OUT	IN 1		VIDEO
	(DVD)
		RS-232C
	IN 2
BD IN	(CD)		DVD	TV SAT	DVR1		DVR2
	XM IN		AUDIO		OUT	IN	OUT		IN
		CON- IN
	OPTICAL	TROL	L
IN 1	IN 1	OUT
	(TV SAT)
	IN 2		R
		IR
	(DVR1)
		ZONE2					SPEAKERS
IN 2	ASSIGNABLE	IN		MULTI CH IN			A	R
	1 - 2
ASSIGN-		OUT
ABLE			FRONT	CENTER	SURROUND SURROUND BACK
1 - 2	OUT
		1	L
		12 V TRIGGER
		2

DIGITAL	(OUTPUT
	12 V	TOTAL	R
	50 mA MAX)

SUBWOOFER

Important

•You can’t use the SR+ features when HDMI Control is set to ON. Make sure to set HDMI Control to OFF when you use the SR+ features (page 67).

•If you connect to a Pioneer flat panel TV using an SR+ cable, you will need to point the remote control at the flat panel TV remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the flat panel TV off.

•Before you can use the extra SR+ features, you need to make a few settings in the receiver. See The Input Setup menu on page 69 and SR+ Setup for Pioneer flat panel TVs on page 72 for detailed instructions.

Note

1The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).

2This receiver is compatible with all SR+ equipped Pioneer flat panel TVs from 2003 onward.

64

En