Professional Calibration EQ graphical output

13Additional information

Professional Calibration EQ graphical output

Symptom	Remedy
The EQ response displayed in	• There are cases where the graph does not appear flat (even when selecting ALL CH ADJUST in the
the graphical output following	Auto MCACC Setup) due to adjustments made to compensate for room characteristics to achieve
calibration does not appear	optimal sound.
entirely flat.	• Areas of the graph may appear identical (before and after) when there is little or no adjustment
	needed.
	• The graph may appear to have shifted vertically when comparing before and after measurements.

EQ adjustments made using	• Despite level adjustments being made, the filters used for analysis may not display these
the Manual MCACC setup on	adjustments in the graphical output. However, these adjustments are taken this into account by the
page 41 do not appear to	filters dedicated to overall system calibration.
change the graphical output.

Lower frequency response curves do not seem to have been calibrated for SMALL speakers.

•Low frequencies used in bass management (the subwoofer channel) will not change for speakers that have been specified as SMALL in the configuration, or do not output these frequencies.

•Calibration is performed, but due to your speakers’ low frequency limitations, no measurable sound is output for display.

Graphical output data seems to • If the power is switched off, the measurement data for graphical output to a PC is cleared. have disappeared.

Display

Symptom	Remedy
The display is dark or off.	• Press DIMMER on the remote control repeatedly to select a different brightness.

After making an adjustment	• Press DIMMER on the remote control repeatedly to select a different brightness.
the display goes off.

You can’t get DIGITAL to	• Check the digital connections and make sure that the digital inputs are assigned correctly (see The
display when using the	Input Setup menu on page 69).
SIGNAL SEL button.	• If the multichannel analog inputs are selected, select a different input source.

The Dolby/DTS indicator	• These indicators do dot light if playback is paused.
doesn’t light when playing	• Check the playback (especially the digital output) settings of the source component.
Dolby/DTS software.

When playing a DVD-Audio	• This is not a malfunction. 96 kHz audio from DVD-Audio discs is only output from the analog
disc, the DVD player display	outputs of the DVD player. This receiver cannot show the playback sample rate when using the
shows 96 kHz. However, the	analog inputs.
receiver’s display does not.

During playback of a DTS 96/24	• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 33).
source, the display doesn’t
show 96 kHz.

When playing Dolby Digital or	• Check that the player is connected using a digital connection.
DTS sources, the receiver’s	• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 33).
format indicators do not light.	• Check that the player isn’t set up so that Dolby Digital and DTS sources are converted to PCM.

	• Ensure that if there are several audio tracks on the disc, the Dolby Digital or DTS is selected.

VSX-01TXH specifications

The Pioneer VSX-01TXH is a feature-rich AV receiver that combines advanced technologies with a commitment to superior sound quality, making it a popular choice for home theater enthusiasts. With a sleek design and an array of connectivity options, it stands as a key component in any high-performance audio system.

At the core of the VSX-01TXH is its powerful amplification system, delivering impressive power output, capable of driving multiple channels with clarity and precision. The device supports up to 7.1 surround sound, providing an immersive audio experience that makes movies, music, and games come alive. Each channel is meticulously calibrated to ensure optimal performance, with the capability to drive high-efficiency speakers for enhanced acoustic results.

One of the standout features of the VSX-01TXH is its support for various high-definition audio formats, including Dolby Atmos and DTS:X, which elevate the surround sound experience by allowing sound to move seamlessly around the listener. This three-dimensional audio technology creates a captivating soundstage that envelops viewers, enriching their entertainment experience.

Connectivity is another crucial aspect of the VSX-01TXH. It is equipped with numerous HDMI inputs and outputs, fully supporting 4K Ultra HD resolution, HDCP 2.2, and HDR formats for stunning visual clarity. The receiver also offers wireless connectivity options, including Bluetooth and Wi-Fi, enabling seamless streaming from various devices. Additionally, built-in support for popular streaming services ensures users can easily access their favorite content.

Another essential feature is the MCACC (Multi-Channel Acoustic Calibration System), which uses a microphone to analyze the acoustic environment of the room. This technology adjusts the speaker settings automatically, optimizing sound quality based on the unique characteristics of the space.

The VSX-01TXH also boasts a user-friendly interface, complete with an intuitive remote control and an easy-to-navigate on-screen menu, making setup and operation a breeze. For users who prioritize visual engagement, the receiver provides zone control capabilities, allowing for audio distribution to different rooms, making it a versatile solution for multi-room audio setups.

In summary, the Pioneer VSX-01TXH is a powerhouse AV receiver that brings together innovative audio technologies, robust amplification, and extensive connectivity options. Its advanced features make it a standout choice for anyone looking to enhance their home entertainment experience.

13Additional information