Pioneer VSX-01TXH manual Other connections Connecting a PC for Advanced Mcacc output

Page 66

08Other connections

Connecting a PC for Advanced MCACC output

When using the Acoustic Calibration EQ Professional (see page 43) to calibrate the reverb characteristics of your listening room, you can graphically check the results on your computer connected to this receiver.

Use a commercially-available RS-232C cable to connect the RS-232C jack on your computer to the 9-pin RS-232C jack on the back panel of this receiver (the cable must be cross type, female–female).

The software to output the results is available from the support area of the Pioneer website (http:// www.pioneerelectronics.com/PUSA/ Home+Entertainment+Custom+Install). Instructions for using the software are also available here. If you have any questions regarding, please contact the Customer Support Division of Pioneer.

Please make sure your system meets the following requirements:

•Operating system must be Microsoft Windows® XP (Service Pack 2) or Windows® 2000.

•CPU must be at least Pentium 3 / 300 MHz or AMD K6 / 300 MHz (or equivalent) with at least 128 MB of memory, and your monitor must be able to display a minimum resolution of 800x600.

•An RS-232C port connector is necessary for graphical output. Refer to the operating instructions and/or the PC manufacturer for more information on making the proper port settings.

•System must have internet access.

•Connect your computer to the RS-232C jack on the rear panel of the receiver.

Make sure that the receiver and all connected components are switched off and disconnected from the power outlet when you do this.1

Use a commercially-available cable to connect the RS-232C jack on your computer to the 9-pin RS-232C jack on this receiver. See the documentation provided with the Advanced MCACC application for more information.

RS-232C

Personal computer

Advanced MCACC output using your PC

Before continuing, make sure you have completed step 1 in Data Management on page 46. Note that transmission data is erased when the receiver is turned off.

1 Select ‘Output PC’ and press ENTER.

When the receiver is ready for transmission, Start the MCACC application on your PC shows on the OSD.

4.Data Management

 

4e.Output

PC

 

a . MCACC Data Check

 

 

 

 

b . Memory Rename

 

 

 

 

c . MCACC Memory Copy

 

 

 

 

d . MCACC Memory Clear

 

Start the

MCACC

 

e . Output PC

 

 

application on your PC

 

:Return

 

 

:Cancel

2Start the MCACC application on your computer. Follow the instructions provided with the application. It will take about ten seconds for the transmission to complete, then you will be able to analyze the output on your computer. Since the data will be cleared from the receiver when you restart reverb measurement or turn off the receiver, you might want to save the information on your PC after measurement.

3When you’re finished, press RETURN.

You will return to the Data Management menu. Continue with other settings in the Data Management menu if necessary. Press RETURN again to exit the Data Management menu.

Note

1Make sure that you do this before continuing to the Reverb Measurement option in Using Acoustic Calibration EQ Professional on page 45 (measurement data is cleared if you switch off the power).

66

En

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Operating Instructions Keep in a Secure AREA. this is for Your Security Operating EnvironmentFederal Communications Commission Declaration of Conformity Information to UserRisk of Electric Shock Do not Open Wash hands after handling Contents Other connections Other SettingsUsing other functions Hdmi ControlFeatures Before you startBefore you start Chapter Checking what’s in the box Installing the receiverBefore you start Loading the batteriesIntroduction to home theater Minute guideMinute guide Chapter Listening to Surround SoundFollow the instructions on-screen Playing a source Problems when using the Auto Mcacc SetupMinute guide Select the input source you want to playPhase Control OFF Better sound using Phase ControlPhase Control on 02 5 minute guideConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment Connecting your equipment About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnecting your equipment Connecting your TV and DVD player Connecting your Blu-ray disc playerFor a second recorder, use the DVR2 in inputs Using the component video jacks Connecting digital audio sourcesConnecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Connecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersBanana plug connections Connecting antennas THX speaker system setupConnecting external antennas Plug the power cord into a power outletPlugging in the receiver Front panel Controls and displaysControls and displays Chapter 13 14Operating range of remote control unit Controls and displaysSpeakers Controls and displays Display Controls and displays Remote control RECEIVERMute TV CtrlSOURCE ReceiverListening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Using the Home THX modesUsing the Advanced surround effects THX SELECT2 GamesUsing Front Stage Surround Advance Listening in stereoTip Choosing the input signal Listening to your system Using Stream DirectSelecting Mcacc presets Hdmi Digital AnalogUsing surround back channel processing Using the Virtual Surround Back modeAuto DTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereo Pro and DVD-Audio stereo sourcesAnalog 2-channel stereo sources SourcesSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Select the setting you want to adjustSetting , Channel Level , Speaker Distance and EQ System Setup menuCustom Menu The default is ALL recommended Options are ALL , Keep SP System , 6 SpeakerIf necessary, confirm the speaker configuration in the OSD.1 Surround back speaker setting Manual Mcacc setupFine Channel Level Adjust the level of the left channelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceAdjust the parameters for the Standing Wave Control Acoustic Calibration EQ AdjustSelect ‘Standing Wave’ from the Manual Mcacc setup menu Select ‘EQ Adjust’ from the Manual Mcacc setup menuSelect the channels you want and adjust to your liking How to use Acoustic Calibration EQ ProfessionalHow to interpret the graphical output Acoustic Calibration EQ ProfessionalUsing Acoustic Calibration EQ Professional Select ‘EQ Professional’, then press EnterSelect an option and press Enter Select ‘Data Management’ from the System Setup menu Data ManagementRenaming Mcacc presets Checking Mcacc preset dataCopying Mcacc preset data Clearing Mcacc presetsSelect ‘Manual SP Setup’, then press Enter System Setup menu Manual speaker setupSpeaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuAdjust the level of each channel using / Select a setup optionConfirm your selected setup option Channel LevelTHX Audio Setting Speaker DistanceCurve 5e.THX Audio Setting Loudness Plus SB SP Position Finish Other connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterBasic playback controls Switching the iPod controls2Other connections ReturnBasic playback controls Other connections Connecting a USB deviceConnecting your USB device to the receiver Connect your USB device.3Using XM Radio Connecting your XM Radio receiverCompressed audio compatibility Listening to channel presets Saving channel presetsUsing XM HD Surround Listening to XM RadioConnecting your SiriusConnect Tuner Using Sirius RadioUsing the XM Menu Press Sirius to switch to the Sirius inputUsing the Sirius Menu Press / to select the channel preset you wantListening to Sirius Radio Switching the speaker system Other connections Connecting the multichannel analog inputsSpeaker B setup Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Making MULTI-ZONE connections Other connections Connecting additional amplifiersMULTI-ZONE listening LargeSurround Back System MULTI-ZONE setup Zone Using the MULTI-ZONE controlsBasic MULTI-ZONE setup Zone MULTI-ZONE listening optionsConnecting an IR receiver MULTI-ZONE remote controlsUsing this receiver with a Pioneer flat panel TV Pioneer flat panel TVUsing the SR+ mode with a Pioneer flat panel TV Other connections Connecting a PC for Advanced Mcacc output Advanced Mcacc output using your PCSelect ‘Output PC’ and press Enter Hdmi Control Setting the Hdmi optionsSetting the Hdmi Control mode Hdmi Control ChapterHdmi Control Before using synchronizationSynchronized amp mode About Hdmi ControlInput Setup menu Other SettingsOther Settings Chapter SetupInput function default and possible settings Other SettingsOther Setup menu Press Receiver on the remote control, then press SetupMulti Channel Input Setup Zone Audio SetupSelect ‘SR+ Setup’ from the Other Setup menu SR+ Setup for Pioneer flat panel TVsOSD Adjustment Select the ‘PDP Volume Control’ setting you wantSetting the Audio options Using other functionsUsing other functions Chapter Press Return to confirm and exit the menuUse / to select the setting you want to adjust Using other functionsSetting the Video options Press RECEIVER, then press Video ParameterPrepare the source you want to record Making an audio or a video recordingSelect the source you want to record Prepare the recorderChecking your system settings Using the sleep timerSwitching the speaker impedance Dimming the displayPress the front panel Auto SURR/STREAM Direct button Using other functions Resetting the systemDefault system settings Press Home THX to confirmPreset code list Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemTV Controlling the rest of your systemControls for TVs On or offControls for other components  & Enter Decide which component you want to use the remote sensorMenu DisplayAdditional information TroubleshootingPower Additional information ChapterAdditional information Other audio problems Settings VideoSignal SEL button Professional Calibration EQ graphical outputDisplay Remote control USB interfaceReceiver to a component or TV with the DeepColor feature Or other setting for your componentOther setting for your component Hdcp Error showsImportant information regarding the Hdmi connection Configuration aConfiguration B XM radio messagesSirius radio messages Additional information Surround sound formats DolbyDTS Neo6 Windows Media Audio 9 ProfessionalDTS Digital Surround DTS 96/24Additional information About THX About Neural THX Surround Additional information About XM About XM Radio XM Ready LegalXM Ready Subscription Stereo 2 channel signal formats ON/AUTOPRO Logic +THX PRO LogicPro Logic llx Music +THX EX +THX Games b Multichannel signal formatsPro Logic IIx Movie +THX a Pro Logic llx Pro Logic IIx Movie +THX aDTS +2 Pro Logic llx Movie +THX a DTS +2 Pro Logic llxDTS +2 Pro Logic DTS +Neo6 DTS +Neo6 +THX Cinema100 Connected Not connectedAdditional information Specifications Cleaning the unitTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-01TXH specifications

The Pioneer VSX-01TXH is a feature-rich AV receiver that combines advanced technologies with a commitment to superior sound quality, making it a popular choice for home theater enthusiasts. With a sleek design and an array of connectivity options, it stands as a key component in any high-performance audio system.

At the core of the VSX-01TXH is its powerful amplification system, delivering impressive power output, capable of driving multiple channels with clarity and precision. The device supports up to 7.1 surround sound, providing an immersive audio experience that makes movies, music, and games come alive. Each channel is meticulously calibrated to ensure optimal performance, with the capability to drive high-efficiency speakers for enhanced acoustic results.

One of the standout features of the VSX-01TXH is its support for various high-definition audio formats, including Dolby Atmos and DTS:X, which elevate the surround sound experience by allowing sound to move seamlessly around the listener. This three-dimensional audio technology creates a captivating soundstage that envelops viewers, enriching their entertainment experience.

Connectivity is another crucial aspect of the VSX-01TXH. It is equipped with numerous HDMI inputs and outputs, fully supporting 4K Ultra HD resolution, HDCP 2.2, and HDR formats for stunning visual clarity. The receiver also offers wireless connectivity options, including Bluetooth and Wi-Fi, enabling seamless streaming from various devices. Additionally, built-in support for popular streaming services ensures users can easily access their favorite content.

Another essential feature is the MCACC (Multi-Channel Acoustic Calibration System), which uses a microphone to analyze the acoustic environment of the room. This technology adjusts the speaker settings automatically, optimizing sound quality based on the unique characteristics of the space.

The VSX-01TXH also boasts a user-friendly interface, complete with an intuitive remote control and an easy-to-navigate on-screen menu, making setup and operation a breeze. For users who prioritize visual engagement, the receiver provides zone control capabilities, allowing for audio distribution to different rooms, making it a versatile solution for multi-room audio setups.

In summary, the Pioneer VSX-01TXH is a powerhouse AV receiver that brings together innovative audio technologies, robust amplification, and extensive connectivity options. Its advanced features make it a standout choice for anyone looking to enhance their home entertainment experience.
Top Page Image Contents