Pioneer VSX-9130TXH-K manual Using the component video jacks, Connecting digital audio sources

Connecting your equipment 03

3 If the device can output digital audio, connect an

optical-type1digital audio output from the recorder to the OPTICAL IN 2 (DVR1) input.

Use an optical cable for the connection.2

•For a second recorder, use the OPTICAL IN 3 (DVR2) inputs.

Using the component video jacks

Component video should give superior picture quality when compared to composite or S-Video. You can also take advantage of progressive scan video (if your source and TV are both compatible), which delivers a very stable, flicker-free picture. See the manuals that came with your TV and source component to check whether they are compatible with progressive-scan video.

								Y
								PB
								PR
								COMPONENT		2
TV									VIDEO
				MONITOR		COMPONENT VIDEO			MONITOR	ANTENNA
OUT	IN	OUT	IN	OUT	OUT	IN 1	IN 2	IN 3	OUT
									Y
									PB		AM LOOP
DVR1		DVR2				2			PR
OUT	IN	OUT	IN			IN	OUT	IN	FRONT		(Single) PRE OUT
						CD	CD-R		SUBWOOFER SURROUND SURROUND BACK
		SPEAKERS		FRONT		CENTER		SURROUND		SURROUND BACK / B
TI CH IN		A	R		L		R		L	R	L
											(Single)
SURROUND SURROUND BACK
										SELECTABLE	SEE INSTRUCTION MANUAL
										SELECTABLE	VOIR LE MODE D'EMPLOI
										VSX-9130TXH
						Y
						PB
						PR
				1		COMPONENT
						VIDEO

1Connect the component video outputs of your source to a set of ASSIGNABLE COMPONENT VIDEO inputs.

Connect using a three-way component video cable.

•Since they are assignable, it doesn’t matter which component video inputs you use for which source. After connecting everything, you’ll need to assign the component video inputs—see The Input Setup menu on page 69.

2Connect the COMPONENT VIDEO MONITOR OUT jacks to the component video inputs on your TV or monitor.

Use a three-way component video cable.

Connecting digital audio sources

This receiver has both digital inputs and outputs, allowing you to connect digital audio components for playback and for making digital recordings.

Most digital components also have analog connections. See Connecting analog audio sources on page 20 if you want to connect these too.

VSX-9130TXH
HDMI				S-							M
				VIDEO IN	IN	OUT	IN	OUT		IN
	COAXIAL
	ASSIGNABLE 1 - 2
OUT	IN 1			VIDEO
	(DVD)
		RS-232C
	IN 2
BD IN	(CD)			DVD	TV SAT	DVR1		DVR2			S
	XM IN			AUDIO
		CON-	IN	IN	IN	OUT	IN	OUT		IN
	OPTICAL	TROL		L
IN 1	IN 1		OUT
	(TV SAT)
	IN 2			R
		IR
	(DVR1)
		ZONE2						SPEAKERS			F
IN 2	IN 3		IN		MULTI CH IN			A	R
	(DVR2)
ASSIGN-
ABLE				FRONT	CENTER	SURROUND SURROUND BACK
1 - 2	OUT
	ASSIGNABLE	12 V		L
	1 - 3
			2
		(OUTPUT
		12 V	TOTAL	R
		50 mA MAX)
	DIGITAL				SUBWOOFER

OPTICAL	OPTICAL		COAXIAL
DIGITAL IN		DIGITAL OUT

DVD player 2 1

CD-R, MD,

DAT, etc.

Note

1• In order to record, you must connect the analog audio cables (the digital connection is for playback only).

•If your video component doesn’t have a digital audio output, you can skip this step.

2If your recorder only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable. When you set up the receiver you’ll need to tell the receiver which input you connected the recorder to (see also The Input Setup menu on page 69).

19

En