Pioneer VSX-9130TXH-K Before using synchronization, About Hdmi Control, Synchronized amp mode

Page 68

09HDMI Control

1Press RECEIVER, then press the SETUP button.

2Select ‘Other Setup’, then press ENTER.

3Select ‘HDMI Control Setup’ from the Other Setup menu.

7.Other Setup

 

7d.HDMI Control

Setup

 

a . Multi

Channel In Setup

 

HDMI Control

 

 

 

 

 

OFF

 

b . ZONE Audio Setup

 

 

 

 

 

 

c . SR+

Setup

 

 

 

 

 

 

d . HDMI Control Setup

 

 

 

 

 

 

 

e . OSD

Adjustment

 

 

 

 

 

 

 

 

:Return

 

 

 

:Finish

4Select the ‘HDMI Control’ setting you want.

ON – Enables the HDMI Control function. When this receiver’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the flat panel TV.1

OFF – The HDMI Control is disabled. Synchronized operations cannot be used. When this receiver’s power is turned off, audio and video of sources connected via HDMI are not output.

5When you’re finished, press SETUP.

You will finish to System Setup menu.

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power on for all components, with the power for the flat panel TV being turned on last.

3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

4Check whether the components connected to all HDMI inputs are properly displayed.

Synchronized amp mode operations

By connecting a component to this receiver with an HDMI cable you can use synchronized amp mode, which

allows you to synchronize the following operations2:

Displays on the flat panel TV when you mute or adjust the volume of this receiver.

The input of this receiver is automatically changed when playback occurs on a connected component.

Even if you change this receiver’s input to a device that is not connected by HDMI, the synchronized amp mode remains in effect.

This receiver’s input switches automatically when the channel is switched on an HDMI control-compatible flat panel TV.

By pressing GENRE when listening to a source from a HDD/DVD recorder, the most appropriate listening mode is automatically selected (see Using the genre synchronizing function on page 35 for more on this).

Canceling synchronized amp mode

Operate the flat panel TV to cancel the synchronized amp mode.

If you cancel synchronized amp mode while connected via HDMI to a flat panel TV or while you are watching a TV programme, the power for this receiver is turned off.

About HDMI Control

Connect the flat panel TV directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Only connect components you intend to use as a source to the HDMI input of this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Synchronized amp mode

Synchronized amp mode begins once you carry out an operation for the flat panel TV. For more information, see the operating manual of your flat panel TV.

Note

1• When HDMI Control is set to ON, the audio/video signals input at the HDMI IN terminals are output at the HDMI OUT terminal even when this receiver is switched off.

• With HDMI Control set to ON, Input Setup and HDMI Input are automatically set to OFF.

2The linked mode remains in effect even when this receiver’s input is switched to something other than HDMI.

68

En

Image 68
Contents VSX-9130TXH-K Operating Environment Federal Communications Commission Declaration of ConformityKeep in a Secure AREA. this is for Your Security Information to UserRisk of Electric Shock Do not Open Wash hands after handling Contents Other Settings Using other functionsOther connections Hdmi ControlBefore you start Chapter FeaturesBefore you start Installing the receiver Before you startChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundFollow the instructions on-screen Problems when using the Auto Mcacc Setup Minute guidePlaying a source Select the input source you want to playBetter sound using Phase Control Phase Control onPhase Control OFF 02 5 minute guideRear panel Connecting your equipmentConnecting your equipment Chapter Connecting your equipment Connecting your equipment About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnecting your equipment Connecting your TV and DVD player Connecting your Blu-ray disc playerFor a second recorder, use the DVR2 in inputs Using the component video jacks Connecting digital audio sourcesAbout the WMA9 Pro decoder Connecting analog audio sourcesConnecting a component to the front panel inputs Connecting your equipment Installing your speaker system Connecting the speakersBanana plug connections Bare wire connectionsPlacing the speakers Connecting antennas THX speaker system setupPlugging in the receiver Connecting external antennasPlug the power cord into a power outlet Controls and displays Controls and displays ChapterFront panel 13 14Speakers Operating range of remote control unitControls and displays Controls and displays Display Controls and displays Remote control RECEIVERTV Ctrl SOURCEMute ReceiverListening to your system Listening to your system ChapterListening in surround sound Auto playbackUsing the Home THX modes Using the Advanced surround effectsListening to your system THX SELECT2 GamesTip Using Front Stage Surround AdvanceListening in stereo Listening to your system Using Stream Direct Selecting Mcacc presetsChoosing the input signal Hdmi Digital AnalogAuto Using surround back channel processingUsing the Virtual Surround Back mode Pro and DVD-Audio stereo sources Analog 2-channel stereo sourcesDTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereo SourcesUsing the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjustSystem Setup menu Custom Menu The default is ALL recommendedSetting , Channel Level , Speaker Distance and EQ Options are ALL , Keep SP System , 6 SpeakerIf necessary, confirm the speaker configuration in the OSD.1 Surround back speaker setting Manual Mcacc setupAdjust the level of the left channel Select ‘Fine SP Distance’ from the Manual Mcacc setup menuFine Channel Level Fine Speaker DistanceAcoustic Calibration EQ Adjust Select ‘Standing Wave’ from the Manual Mcacc setup menuAdjust the parameters for the Standing Wave Control Select ‘EQ Adjust’ from the Manual Mcacc setup menuHow to use Acoustic Calibration EQ Professional How to interpret the graphical outputSelect the channels you want and adjust to your liking Acoustic Calibration EQ ProfessionalSelect an option and press Enter Using Acoustic Calibration EQ ProfessionalSelect ‘EQ Professional’, then press Enter Select ‘Data Management’ from the System Setup menu Data ManagementChecking Mcacc preset data Copying Mcacc preset dataRenaming Mcacc presets Clearing Mcacc presetsSystem Setup menu Manual speaker setup Speaker SettingSelect ‘Manual SP Setup’, then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menuSelect a setup option Confirm your selected setup optionAdjust the level of each channel using / Channel LevelCurve THX Audio SettingSpeaker Distance 5e.THX Audio Setting Loudness Plus SB SP Position Finish Connecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterSwitching the iPod controls2 Press iPod Ctrl to switch the iPod controls.3Other connections Basic playback controlsOther connections Connecting a USB device Connecting your USB device to the receiverSwitch on the receiver and your TV Basic playback controlsCompressed audio compatibility Using XM RadioConnecting your XM Radio receiver Saving channel presets Using XM HD SurroundListening to channel presets Listening to XM RadioUsing Sirius Radio Using the XM MenuConnecting your SiriusConnect Tuner Press Sirius to switch to the Sirius inputListening to Sirius Radio Using the Sirius MenuPress / to select the channel preset you want Other connections Connecting the multichannel analog inputs Speaker B setupSwitching the speaker system Selecting the multichannel analog inputsConnect your speakers as shown below Bi-wiring your speakersBi-amping your front speakers Other connections Connecting additional amplifiers MULTI-ZONE listeningMaking MULTI-ZONE connections LargeUsing the MULTI-ZONE controls Basic MULTI-ZONE setup ZoneSurround Back System MULTI-ZONE setup Zone MULTI-ZONE listening optionsConnecting an IR receiver MULTI-ZONE remote controlsUse the Master Volume dial to adjust the volume Press ControlUsing this receiver with a Pioneer flat panel TV Pioneer flat panel TVUsing the SR+ mode with a Pioneer flat panel TV Select ‘Output PC’ and press Enter Other connections Connecting a PC for Advanced Mcacc outputAdvanced Mcacc output using your PC Setting the Hdmi options Setting the Hdmi Control modeHdmi Control Hdmi Control ChapterBefore using synchronization Synchronized amp modeHdmi Control About Hdmi ControlOther Settings Other Settings ChapterInput Setup menu SetupOther Settings Other Setup menuInput function default and possible settings Press Receiver on the remote control, then press SetupMulti Channel Input Setup Zone Audio SetupSR+ Setup for Pioneer flat panel TVs OSD AdjustmentSelect ‘SR+ Setup’ from the Other Setup menu Select the ‘PDP Volume Control’ setting you wantUsing other functions Using other functions ChapterSetting the Audio options Press Return to confirm and exit the menuUsing other functions Setting the Video optionsUse / to select the setting you want to adjust Press RECEIVER, then press Video ParameterMaking an audio or a video recording Select the source you want to recordPrepare the source you want to record Prepare the recorderUsing the sleep timer Switching the speaker impedanceChecking your system settings Dimming the displayUsing other functions Resetting the system Default system settingsPress the front panel Auto SURR/STREAM Direct button Press Home THX to confirmSetting the remote to control other components Selecting preset codes directlyPreset code list Controlling the rest of your systemControlling the rest of your system Controls for TVsTV On or offControls for other components Decide which component you want to use the remote sensor  & EnterDisplay HDDTroubleshooting PowerAdditional information Additional information ChapterAdditional information Other audio problems Settings VideoDisplay Signal SEL buttonProfessional Calibration EQ graphical output Remote control USB interfaceOr other setting for your component Other setting for your componentReceiver to a component or TV with the DeepColor feature Hdcp Error showsConfiguration a Configuration BImportant information regarding the Hdmi connection XM radio messagesSirius radio messages Additional information Surround sound formats DolbyWindows Media Audio 9 Professional DTS Digital SurroundDTS Neo6 DTS 96/24Additional information About THX About Neural THX Surround XM Ready Subscription Additional information About XMAbout XM Radio XM Ready Legal PRO Logic Stereo 2 channel signal formatsON/AUTO PRO Logic +THX Multichannel signal formats Pro Logic IIx Movie +THX a Pro Logic llxPro Logic llx Music +THX EX +THX Games b Pro Logic IIx Movie +THX aDTS +2 Pro Logic llx DTS +2 Pro LogicDTS +2 Pro Logic llx Movie +THX a DTS +Neo6 DTS +Neo6 +THX Cinema100 Connected Not connectedAdditional information Specifications Additional information Cleaning the unit To establish a safe levelOnce you have established a comfortable sound level Decibel Level ExamplePioneer Corporation