Trane WSHP-DS-6 manual Features Heat Recovery Benefits, Desuperheater Option, Circulating Pump

Page 6

Features

Heat

and

Recovery

Benefits

 

Desuperheater Option

The desuperheater option is a heat recovery system packaged within the water-to-water unit. This option captures heat energy from the heat pump for considerable cost savings all year. Since it is active in either operating mode, it can provide hot water at a reduced cost while in heating or virtually free hot water while in cooling.

Standard equipment includes:

θDesuperheater (heat exchanger)

θCirculating pump

θEntering water temperature detector (125 F stops pump)

θDischarge refrigerant temperature detector (145 F starts pump)

θFuse

θWater heater hook-up kit

The unit employs a circulating pump to move water through a double wall heat exchanger. It then returns the heated water to the water tank. This water is heated by superheated re- frigerant discharge gas from the compressor. This heat energy can now be utilized as a cost savings in water heating.

Circulating Pump

The pump is a circular, single stage open system pump. Its specifica- tions include:

θ1/25 HP (horsepower)

θ230 Volt / 60 Hertz / 1 phase

θ90 Watts

θ.40 Amps

θ2865 rpm (revolutions per minute)

θ2 MF (microfarad) / 400 Volt capacitor

The pump contains a minimum fluid temperature rating of 50 F, a maxi- mum fluid temperature (open sys- tem) of 140 F, and a maximum working pressure of 145 psi.

Isolation

Valves (by others)

Desuper-out

Desuper-in

Hot water (Supply)

from Desuperheater

to Desuperheater

Water heater hook-up kit with drain valve

Cold water (Supply)

6

Image 6
Contents WSHP-DS-6 March Water Source Heat Pump Water-to-Water Model WpwdIntroduction Table of Contents Features General Benefits Features Controls Benefits Features Heat Recovery Benefits Desuperheater OptionCirculating Pump Digit 8 Voltage / Hertz / Phase Model Number DescriptionGeneral Data Table G-1 Physical Data EnglishApplication Considerations Closed Loop SystemOpen Loop System Cooling Tower/Boiler SystemApplication Source Side Considerations Load Side Source vs. LoadApplication Closed Loop Considerations Geothermal Geothermal Integrated SystemTypical Benefits Application Fresh Air Considerations Ventilation Water-to-Water Fresh Air VentilationApplication Fresh Air Considerations Ventilation Mechanical Application Central Considerations Pumping System Central Pump ApplicationApplication Well Water Considerations Systems Well Water ApplicationApplication Distributed Considerations Pumping System Earth Coupled ApplicationElectrical Data Table E-1 Electrical Data

WSHP-DS-6 specifications

The Trane WSHP-DS-6, or Water Source Heat Pump - Design Series 6, is a highly efficient and versatile solution designed to meet the complex heating and cooling needs of commercial buildings. With a firm reputation for reliability and performance, the WSHP-DS-6 integrates advanced technologies to optimize energy consumption and enhance climate control.

One of the standout features of the WSHP-DS-6 is its exceptional efficiency ratings. The unit boasts a high Coefficient of Performance (COP) and Energy Efficiency Ratio (EER), ensuring that it delivers cost-effective heating and cooling while minimizing energy usage. This not only lowers operational costs but also contributes to reduced environmental impact.

The heat pump is equipped with a hermetically sealed scroll compressor, known for its durability and quiet operation. This technology allows for smooth operation under a variety of conditions, making the WSHP-DS-6 suitable for different environments. The compressor, combined with a robust heat exchanger, ensures optimal heat transfer, resulting in enhanced overall system performance.

Another notable characteristic of the WSHP-DS-6 is its compact design, which facilitates easy installation in a variety of settings, including tight spaces often found in urban environments. Additionally, the unit comes with advanced controls that allow for precise temperature management, ensuring the indoor environment remains comfortable year-round.

The WSHP-DS-6 also supports water heating capabilities, providing hot water on demand. This flexibility makes it a cost-effective solution for facilities that require both space heating and hot water supply, such as hotels, schools, and healthcare facilities.

Moreover, the unit features integrated zone control options, which enable the customization of heating and cooling for different areas within a building. By allowing targeted climate control, the WSHP-DS-6 enhances occupant comfort while further improving overall energy efficiency.

In terms of sustainability, the WSHP-DS-6 is designed to work effectively with environmentally friendly refrigerants, aligning with current regulations and promoting eco-friendly practices. This commitment to sustainability, combined with superior performance features, makes the Trane WSHP-DS-6 a top choice for building managers seeking reliable and efficient climate control solutions.

Overall, the Trane WSHP-DS-6 represents a perfect blend of technology, efficiency, and adaptability, making it an excellent investment for commercial property owners focused on sustainable building management.