Trane WSHP-DS-6 Application Distributed Considerations Pumping System, Earth Coupled Application

Page 17

Application Distributed

Considerations Pumping

System

8

7

6

1

5

2

 

4 3

Figure 12: Distibuted pumping installation

General

Adistributed pumping system con- tains either a single or dual pump module connected directly to the units supply and return source side. This design requires individual pump modules specifically sized for each water source heat pump. Cen- tralized pumping is not required.

See Figure 12 for a distributed pumping installation.

Earth Coupled

Application

￿￿Ball valves should be installed in the supply and return lines for unit isolation.

￿￿Flexible hoses may be used to connect the water supply and return lines to the water inlets and outlets. These hoses reduce possible vibration between the unit and the rigid system.

Note: Hoses and or pipes should be braided stainless steel, and sized suitable for the system’s water pressure and flow rate.

￿￿Load side connections are used to supply the terminal device.

￿￿The sound attenuation pad should be slightly oversized for the unit. This field supplied product is recommended for sound absorption of unit.

￿￿The low voltage control con- nection provided on the unit is large enough for attaching con- duit.

￿￿The ground loop pump mod- ule is designed for circulating commercial loops that require a maximum flow rate of 20 gpm.

￿￿The line voltage disconnect should be installed for branch circuit protection. The unit is supplied with an opening for attaching conduit.

￿￿All polyethene pipe in the closed loop design should be insulated to eliminate the risk of sweating.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents March Water Source Heat Pump Water-to-Water Model Wpwd WSHP-DS-6Introduction Table of Contents Features General Benefits Features Controls Benefits Circulating Pump Features Heat Recovery BenefitsDesuperheater Option Model Number Description Digit 8 Voltage / Hertz / PhaseTable G-1 Physical Data English General DataClosed Loop System Application ConsiderationsCooling Tower/Boiler System Open Loop SystemSource vs. Load Application Source Side Considerations Load SideTypical Benefits Application Closed Loop Considerations GeothermalGeothermal Integrated System Water-to-Water Fresh Air Ventilation Application Fresh Air Considerations VentilationApplication Fresh Air Considerations Ventilation Mechanical Central Pump Application Application Central Considerations Pumping SystemWell Water Application Application Well Water Considerations SystemsEarth Coupled Application Application Distributed Considerations Pumping SystemTable E-1 Electrical Data Electrical Data

WSHP-DS-6 specifications

The Trane WSHP-DS-6, or Water Source Heat Pump - Design Series 6, is a highly efficient and versatile solution designed to meet the complex heating and cooling needs of commercial buildings. With a firm reputation for reliability and performance, the WSHP-DS-6 integrates advanced technologies to optimize energy consumption and enhance climate control.

One of the standout features of the WSHP-DS-6 is its exceptional efficiency ratings. The unit boasts a high Coefficient of Performance (COP) and Energy Efficiency Ratio (EER), ensuring that it delivers cost-effective heating and cooling while minimizing energy usage. This not only lowers operational costs but also contributes to reduced environmental impact.

The heat pump is equipped with a hermetically sealed scroll compressor, known for its durability and quiet operation. This technology allows for smooth operation under a variety of conditions, making the WSHP-DS-6 suitable for different environments. The compressor, combined with a robust heat exchanger, ensures optimal heat transfer, resulting in enhanced overall system performance.

Another notable characteristic of the WSHP-DS-6 is its compact design, which facilitates easy installation in a variety of settings, including tight spaces often found in urban environments. Additionally, the unit comes with advanced controls that allow for precise temperature management, ensuring the indoor environment remains comfortable year-round.

The WSHP-DS-6 also supports water heating capabilities, providing hot water on demand. This flexibility makes it a cost-effective solution for facilities that require both space heating and hot water supply, such as hotels, schools, and healthcare facilities.

Moreover, the unit features integrated zone control options, which enable the customization of heating and cooling for different areas within a building. By allowing targeted climate control, the WSHP-DS-6 enhances occupant comfort while further improving overall energy efficiency.

In terms of sustainability, the WSHP-DS-6 is designed to work effectively with environmentally friendly refrigerants, aligning with current regulations and promoting eco-friendly practices. This commitment to sustainability, combined with superior performance features, makes the Trane WSHP-DS-6 a top choice for building managers seeking reliable and efficient climate control solutions.

Overall, the Trane WSHP-DS-6 represents a perfect blend of technology, efficiency, and adaptability, making it an excellent investment for commercial property owners focused on sustainable building management.
Top Page Image Contents