Kenwood TK-260G, TK-270G service manual Memory Reset Mode

TK-260G/270G

REALIGNMENT

No. Function		Choices	Display	Remarks
34	D Key	D Code	DKA_D_CD Default
	Assignment 1-16/1s		DKA_16__
35	DTMF	Code SQ	DTMF_OFF	Default
	Signaling	SEL CALL	DTMF_SEL
36	Inter Mediaate	0-9,A-D,*,#	IMC__#_	Default: # (Can be set only when
	Code			DTMF signaling = SEL CALL.)

When the [°] switch is pressed while "SELF" is displayed, the memory is reset.

When the memory is reset, mode data and model data are

not reset.

The TK-260G cannot reset the memory.

●Flow Chart

37	Group Code 0-9,A-D,*,#		GPCD_FF_ Default;OFF
38	Auto Rest OFF		ART_OFF_
	Time	1-15/1s	ART__10	Default;10s
39	Call Alert/	OFF	CA/T_OFF	Default
	Transpond	Call Alert	CA/T_C/A
		Transpond	CA/T_T/A
		(Call Alert)
		Transpond	CA/T_T/I
		(ID Code)
		Transpond	CA/T_T/T
		(tanspond Code)
			Others
40	Panel Test/panel	Enable	PTM_ENA	Default (Not used for TK-260G)
	Tuning MODE	Disable	PTM_DIS

8-4. Memory Reset Mode

This mode is used to clear data for functions that can be set in Self Programming Mode or to return to reset values (default). "CANCEL"Pressing. [°] when "SELF" is shown, sets the display to Turning the encoder alternately switches the display

between "CANCEL""READY".

Pressing [°] when "READY" is shown, clears the data and sets the display to "CLEAR".

Pressing [°] again, returns the display to "SELF". Pressing [°] when "CANCEL" is shown, returns the display

to "SELF" without resetting the data.

Function Setting Mode

	Self programming mode		[LAMP]	Squelch level	[LAMP]
[LAMP]		[LAMP]	[LAMP]	[2]/[3]	[LAMP]
	Function set mode			Priority
[LAMP]			[LAMP]	[2]/[3]	[LAMP]
	[LAMP] key function			Look back time A
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[MON] key function			Look back time B	[LAMP]
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[	] key function		Revert channel
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[	] key function		Dropout delay time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[2] key function			Dwell time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[3] key function			Digit time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	[CH] key function			Inter digit time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	Power on tone yes/no			First digit time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	Contorol tone yes/no			First digit delay
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	WArning tone yes/no			Rise time with QT
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	Time Out Timer			Dial ID
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	T.O.T. Pre-alert time			No. of DTMF key
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	T.O.T. Rekey time			DTMF hold time
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	T.O.T. Reset time			Store & Send
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	Clear to Transpond			D key assignment
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
	Battery Save on/off			DTMF signaling
[LAMP]		[2]/[3]	[LAMP]	[2]/[3]
		Signaling		Inter mediate code
		[2]/[3]		[2]/[3]

Group code

[2]/[3]

Auto reset time

[2]/[3]

Call alert/Transpond

[2]/[3]

Panel test/Panel tuning

mode

15