Kenwood TK-270G, TK-260G Disassembly for Repair, Separating the case assembly from the chassis

TK-260G/270G

DISASSEMBLY FOR REPAIR

Separating the case assembly from the chassis.

1.Remove the two knobs z and three round units x.

2.Remove the two screws c.

3.Expand the right and left sides of the bottom of the case assembly, lift the chassis, and remove it from the case assembly v.

TK-260G

❶

❷

stopper

TK-270G

❷ ❷❶

❷ ❶

❸

❸

Separating the chassis from the unit.

• TK-260G

1.Remove the twelve small screws m, and the three large screws ,.

2.Remove the solder from the antenna terminal using a soldering iron, then lift the unit off (X57).

• TK-270G

1. Remove the three screws ..

Lift the unit (X54), and rise up the connecter lever in the arrow with your finger /.

Remove the three hexagonal bosses-, and remove the twelve screws m.

2.Remove the solder from the antenna terminal using a soldering iron, then lift the unit off (X57).

TK-270G

❹

4.Taking cure not to cut the speaker lead b, open the chassis and case assembly, and pull the speaker lead with connector n.

b

CN3

n

❾

X54-

❾

❾		Ω
		❿ X57-
Ω
Ω
		➐ ➐	➐	➐
			➐
➐	➐	❽➐ ➐
❽			➐
X57-
❽

Antenna teminal

➐

➐

16