Operating Features, Operation Features | Kenwood TK-260G, TK-270G

TK-260G/270G

OPERATING FEATURES

1. Operation Features

causes an error tone to sound. (When changing a channel from high to low power, all channels programmed with high power are changed to low.)

• TK-260G

Channel selector Rotate to select a channel (1 ~ 8).

Antenna

Power switch/ Volume control Turn clockwise to switch ON the transceiver. Rotate to adjust

•2-Tone Encode Select: To transmit using a 2-Tone code, press the PTT switch and the 2-Tone Encode Select key, then speak into the microphone in your normal voice.

Release the PTT switch and 2-Tone Encode Select key to receive.

LED indicator Lights red while transmitting. Lights green while receiving. Flashes orange while receiving a 2-Tone or DTMF signal that matches the one set up in your transceiver. Flashes red when the battery power is low while transmitting.

PTT (Push-to- Talk) switch Press this switch, then speak into the microphone to call a station.

the volume. To switch OFF the transceiver, turn counterclockwise fully.

Microphone

Speaker

SP/MIC jacks

•TK-270G

Antenna

Speaker

y u

qwe

Microphone

1 2 3 A

4 5 6 B

7 8 9 C

0 D

Side 1 key Press to activate its programmable function.

Side 2 key Press to activate its programmable function.

Connect an optional speaker/ microphone here.

The transceiver is shown with the optional KNB-14 battery pack.

q Rotary encoder

Your dealer can program the encoder as either

Group Up/Down or Channel Up/Down (default

setting). Rotate to select a group or channel. Also

rotate to adjust the squelch in Squelch Adjustment

mode.

Programmable Auxiliary Functions

Side 1 key and Side 2 key can each be programmed with one of the following auxiliary functions:

•Monitor A (Monitor Unmute–Momentary): Press and hold the Monitor key to hear background noise. Release the key to return to normal operation.

•Monitor B (Monitor Unmute–Toggle): Momentarily press the Monitor key to hear background noise. Press the key again to return to normal operation.

•Monitor C (Carrier Squelch–Momentary): Press and hold the Monitor key to deactivate QT, DQT, 2-Tone, or DTMF signalling. Release the key to return to normal operation.

•Monitor D (Carrier Squelch–Toggle): Momentarily press the Monitor key to deactivate QT, DQT, 2-Tone, or DTMF signalling. Press the key again to return to normal operation.

•None: No function.

•RF Power Lo: Press the RF Power Lo key to toggle the output power of a channel between high and low. This can only be used for channels that have been programmed with high power. Pressing RF Power Lo while using a channel programmed with low power

wLED indicator

Lights red while transmitting. Lights green while receiving. Flashes orange while receiving a Code Squelch code or a Selective Call code, or a 2-Tone or DTMF signal that matches the one set up in your transceiver. Flashes red when the battery power is low while transmitting.

ePower switch/ Volume control

Turn clockwise to switch ON the transceiver. Rotate to adjust the volume. To switch OFF the transceiver, turn counterclockwise fully.

rPTT (Push-to-Talk) switch

Press this switch, then speak into the microphone to call a station.

tSide 1 key

This is a PF (Programmable Function) key. Press it to activate its auxiliary function (page 4).

ySide 2 key

This is a PF (Programmable Function) key. Press it to activate its auxiliary function (page 4).