Dynacord PowerMate 600 owner manual Monitor MIX

STANDARD-PA

MONITOR MIX

•

•

•

Lower the setting of the AUX fader within the master section.

Adjust the AUX faders of all input channels that are momentarily in use at their center position.

Push the AUX fader up as far as absolutely necessary. In this way you have enough headroom before feedback, even when the microphone are not optimally positioned.

•Use the FX to AUX control to add the effect mix to the monitor mix, without influencing the main mix. Please keep in mind that normally, the monitor mix needs less effect than the main mix.

Let the artists perform some and check the sound of the system from different angles and distances. If you come to the conclusion that some corrections in the overall sound image are necessary, activate the 7-band stereo equalizer in the master section and match the sound to your liking. By doing so, you should also remember, that during the performance the sound is going to be altered because the audience is present. This circumstance has a major effect on the acoustical condition of the location and its absorption of low frequencies. If possible, check the “sound in the house” during the performance and – if necessary – make adjustments to compensate for the changed conditions.

And for the rest, we like to wish you lots of fun and success with your new PowerMate mixer.

40