EAW DX810 instruction manual Indicators/Presets/Control

Page 18

Output EQ

This toggles the Output EQ window open and closed. It duplicates the function of the Output EQ button in the Button Section.

Compressor

This toggles the Compressor window open and closed. It duplicates the function of the Compress button in the Button Section.

Gate

This toggles the Gate window open and closed. It duplicates the function of the Gate button in the Button Section.

Delay

This toggles the Delay window open and closed. It duplicates the function of the Delay button in the Button Section.

XOver

This toggles the Crossover window open and closed. It duplicates the function of the X-Over button in the Button Section.

Options

The Options window is reserved for future upgrades.

Force Control

This toggles the Force Control window open and closed. It duplicates the function of the Force Ctrl button in the Button Section.

Logic Input

This toggles the Logic Input window open and closed. It duplicates the function of the Logic In button in the Button Section.

Logic Output

This toggles the Logic Output window open and closed. It duplicates the function of the Logic Out button in the Button Section.

Remote Mapping

This toggles the Remote Mapping window open and closed. It duplicates the function of the Remotes button in the Button Section.

Indicators/Presets/Control

Active Logic Inputs

These light to indicate when a logic input is active (e.g., contact closure).

Active Logic Outputs

These light to indicate when a logic output is active.

Presets

The DX–810–PC stores up to 24 presets, which can be selected via the Presets pull-down box. Select a preset in the pull-down box and the settings are instantly recalled from memory.

Save To Preset

Click this button to save the current mixer, processor, and group assignment settings to a preset.

The Save To Preset window opens. Enter a name for the preset, then click the Save To Preset button next to it to save it.

Clear Edits

If changes are made to a stored preset, and you want to return to the original settings, click this button. This restores the settings for the currently selected preset.

On Line

Click this button to initiate communication with the DX810. This button lights to indicate when there is active communication between the DX810 and the DX–810–PC application. Click this button again to terminate communication.

Panel Lock

Indicates front panel lock status. Click this button to lock and unlock front panel control. Note that the lock code is not required to use this control. It doesn’t affect the PC application’s controls.

18 – DX810

Image 18
Contents DX810 Safety Instructions Introduction KEY Features DX810 Digital MixerFront Panel Features Rear Panel FeaturesInputs DX10e Expansion Panel BUS a and B TrimRecord Out IEC AC SocketConnections AC Power Considerations Connecting the Logic I/OConnecting the Remote BUS Start Up Quick StartMake the Connections Set the LevelsSoftware Updates Using InputsUsing the BUS a and B Inputs Accessing the Digital Signal ProcessorsUsing the Record Output Using the Direct OutputsUsing Outputs a Through J Using the Remote ControlsLogic Inputs Logic OutputsAdministrator Level Password ProtectionInstalling the Software Upgrading the SoftwareConnecting a PC Upgrading the FirmwareOverview TOP Section Menu BarSet Temperature Firmware UpgradeConfigure COM Ports Set Lock CodeWindows About Set Powerup PresetSet Global Faders Close Window EscIndicators/Presets/Control Button Section Assignments Force CtrlLogic Input Proc Logic OutGroups Out ProcFunction Affected I/O Mute IndRemotes Combine RulesThree Room Combination Crosspoint GroupAssign Combinations Band Graphic EQ Band Parametric EQCompress About Gating OverCrosspoint Matrix Section OptionInput Section Output SectionExclusive Enable Program Selection Group SectionSpecifications DX810 Block DiagramDX810 Specifications Inputs / OutputsDX810 Service Information DisclaimerAppendix a Logic Input Functions Appendix C Selection Remote Predefined Functions Appendix D Level Remote Predefined Functions EAW Commercial a Loud Technologies Inc. Company