EAW DX810 instruction manual

Page 31

AUDIO

Noise

(20 Hz-20 kHz bandwidth, Master Out, channel Trims @ unity gain, channel EQs flat, all odd channels panned left, even channels panned right):

Master level @ unity, channel levels @ unity: –82 dBu

Single channel to Master Out:–100 dBu (referenced to 1% THD+N)

Total Harmonic Distortion (THD+N)

(1 kHz @ +10 dBu (unity level) 20 Hz-20 kHz):

Mic in to Master Out:

< 0.005%

Crosstalk

(1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, any line input to adjacent Direct Out):

Trim to unity:

< –90 dB

Frequency Response

 

Mic input to any output:

20 Hz–20 kHz, ±0.5 dB

Equivalent Input Noise (EIN)

Mic in to Direct out, max gain, 150 ohm termination:

–129.5 dBm unweighted

Common Mode Rejection (CMR)

Mic in to Direct out, max gain, 1 kHz signal: better than 80 dB

Maximum and Nominal Levels and Ranges

Mic inputs:

+18 dBu, +4 dBu,

 

 

0 to 60 dB gain

 

Line inputs:

+18 dBu, +4 dBu,

 

 

–30 to +30 dB gain

 

Bus A/B inputs:

+18 dBu, +4 dBu,

 

 

–20 to +20 dB gain

 

All outputs:

+18 dBu, +4 dBu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Impedances

 

Mic inputs:

1.3K ohms

Line inputs:

40K ohms

All other inputs:

10K ohms or greater

All outputs:

120 ohms

PHYSICAL

Dimensions (HxWxD): 3.5"/2 RU (89mm) x 19" (483mm) x

 

13.25" (337mm)

Net Weight:

12.9 lbs. (5.9 kg)

ELECTRICAL

AC Power:

90–240 VAC, 50/60 Hz, 1.0 A

DC Power:

24 VDC, 3 A

Phantom Power:

+48 VDC, current limited to 7 mA

 

per input channel

Fuse Ratings:

1.6 A Slo Blo, 250 V

PC SYSTEM REQUIREMENTS

OS:

Windows® 95, 98, NT®, 2000, XP

Processor:

Pentium® or faster

RAM:

16 MB minimum

 

32 MB recommended

Storage:

10 MB free disk space

Display:

800x600 pixels, 256 colors minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DX810

DX810 DIGITAL MIXER

DX810 – 31

Image 31
Contents DX810 Safety Instructions Introduction DX810 Digital Mixer KEY FeaturesRear Panel Features Front Panel FeaturesInputs IEC AC Socket BUS a and B TrimRecord Out DX10e Expansion PanelConnections Connecting the Logic I/O AC Power ConsiderationsConnecting the Remote BUS Set the Levels Quick StartMake the Connections Start UpAccessing the Digital Signal Processors Using InputsUsing the BUS a and B Inputs Software UpdatesUsing the Remote Controls Using the Direct OutputsUsing Outputs a Through J Using the Record OutputLogic Outputs Logic InputsUpgrading the Software Password ProtectionInstalling the Software Administrator LevelUpgrading the Firmware Connecting a PCOverview Menu Bar TOP SectionSet Lock Code Firmware UpgradeConfigure COM Ports Set TemperatureClose Window Esc Set Powerup PresetSet Global Faders Windows AboutIndicators/Presets/Control Assignments Force Ctrl Button SectionLogic Out Proc Logic OutGroups Input ProcCombine Rules Mute IndRemotes Function Affected I/OCrosspoint Group Three Room CombinationAssign Combinations Band Parametric EQ Band Graphic EQCompress Over About GatingOption Crosspoint Matrix SectionOutput Section Input SectionGroup Section Exclusive Enable Program SelectionDX810 Block Diagram SpecificationsInputs / Outputs DX810 SpecificationsDX810 Disclaimer Service InformationAppendix a Logic Input Functions Appendix C Selection Remote Predefined Functions Appendix D Level Remote Predefined Functions EAW Commercial a Loud Technologies Inc. Company