Getting Started Connections Basic Operations Effector Function Fader
Effecter Screen
q |
|
w |
|
e |
|
r |
|
y |
|
u |
|
i | o |
|
Q0 Q1 t
Effecter Operations
Selecting the effector units and channels
With the input channels:
Using the EFX SEND 1 and 2 buttons, select the effect units to be used. The same effect can be selected for a multiple number of channels.
With the mic input and master output:
Using the EFX INS 1 or 2 button, select the effect unit to be used. The insertion operation is initiated and just the one channel is selected.
*It is not possible to select both effect units at the same time for all the channels.
Setting the BPM
1button for over 1 second to turn the auto BPM counter on.When the auto BPM counter is off, press the TAP
Start USB Utility Specifications
qEffect display
The names of the effects now selected are displayed here.
wBPM mode indicator
AUTO :
AUTO is displayed when AUTO BPM has been selected as the BPM mode setting.
TAP :
TAP is displayed when the TAP input mode has been selected.
INPUT :
INPUT is displayed when the INPUT mode has been selected.
eBPM source indicator
tEffecter BPM display
The current BPM value is displayed here.
yBeat display
The beat (number of beats) setting is displayed here.
uTime display
iBeat display bar
oTime display bar
Q0Parameter control indicator
Q1Dry/wet control indicator
2button and release it immediately. The data measured with the auto BPM function is locked.
*The channel for which the effect unit was last selected using the EFX SEND or EFX INS button
takes effect as the channel used for the auto BPM counter measurement.When the auto BPM counter is on, press the TAP
Press and hold in the TAP button for over 2 seconds.
3 The BPM can now be input manually. The BPM value can be set directly by pressing the BEAT 
, 
buttons.
Troubleshooting
The signal source now subject to auto BPM detection is displayed here.
rLock icon
This lights when BPM is locked.
4 BPM is measured at the interval during which the TAP buttons are repeatedly pressed.
10