Denon DJ DN-X1700 owner manual Preset Export, Preset Recall, Preset Import, Owner Setting Mode

Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting

Owner Setting Mode

When the POWER switch is set to the ON position while the UTILITY/–USB A/USB B button is held down, the Owner Setting mode is established, and the settings listed below can be selected.

To release the Owner Setting mode, set the POWER switch to the OFF position.

	Parameter	Value	Default
1. Limiter		OFF / ON	OFF
2.	Limiter Threshold	20dB to 10dB	20dB
3.	Digital Output FS	INT / 44.1kHz / 48kHz / 96kHz	44.1kHz
4. Power ON USB Mode		USB A / USB B	USB A
5.	Preset Import	Exit / Execute*1	-
6.	DN-X1700 Initalize	Exit / Execute*2	-

*1: Using the Preset stored externally, the internal memory is updated, and the settings are reflected in the device.

*2: All the Owner settings and Preset are set to the factory settings.

Preset Export

1 Connect the USB memory device to the unit and, using the Utility settings, execute Preset Export.

2 The Preset statuses are written into the USB memory device.

*If the export file already exists, a screen prompting the user to verify whether the file is to be overwritten appears.

Preset Recall

Insert the USB memory device with the export files

1 into the DN-X1700 or turn on the unit's power with the device already inserted.

2 A screen prompting the user to verify whether the presets are to be called appears.

When OK is selected, the preset Audio Setting and

3 MIDI Setting of the export file are called. (The preset information stored inside the DN-X1700 is not updated.)

4prompting the user to verify whether to return to the

status before the presets were called appears. (Cancel cannot be selected.)When the USB memory device is ejected, a screen

When OK is selected, the	presets are restored to the
5 status before they were called.

*After the presets are called, they are retained while the unit remains connected to the computer even if the USB B mode is selected.

Preset Import

In the Owner Setting mode, insert the USB memory

1 device with the export files into the DN-X1700 or establish the Owner Setting mode with the device already inserted.

2 A screen prompting the user to verify whether the preset memory is to be updated appears.

When OK is selected, the contents of the preset

3 memory are updated to the contents of the export files.

* Bear in mind that the data prior to the updating will not be retained.

18