Denon DJ DN-X1700 owner manual Specifications

Specifications

n AUDIO		(0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms)
•	PHONO inputs	Stereo x 4	Unbalanced RCA terminal
	Input impedance:	47 kΩ/kohms
	Level:	–40 dBV (10 mV)
•	CD inputs	Stereo x 4	Unbalanced RCA terminal
	Input impedance:	10 kΩ/kohms
	Level:	0 dBV
•	Equalizer (LINE)	Band x 3
	Channel equalization adjustment range:
		HI: –∞,–90 dB to +10 dB
		MID: –∞,–90 dB to +10 dB
		LOW: –∞,–90 dB to +6 dB
•	RETURN inputs	Monaural x 2	1/4" TS terminal
	Input impedance:	10 kΩ/kohms
	Level:	–10dBV/0dBV (Default: –10dBV)
•	MIC inputs	Monaural x 2
	MIC1:	Balanced and unbalanced	XLR connectors and 1/4" TS terminal
		(1: Ground, 2: Hot, 3: Cold)
	MIC2:	Balanced 1/4" TRS jack
		(Tip: hot, ring: cold, sleeve: ground)
	Input impedance:	5 kΩ/kohms
	Level:	–60 to –20 dBu
	EIN:	Less than –127 dBu (Rs = 150 Ω/ohms)
	CMRR:	More than 80 dB (1 kHz)
•	Equalizer (MIC)	Band x 2
	Adjustment range:	HI: –15 to +15 dB
		LOW: –15 to +15 dB
•	Digital coaxial inputs	Stereo RCA terminal x 4, IEC958 Consumer (Fs: 32 kHz to 96 kHz)

•	BOOTH output	Stereo	Balanced 1/4" TS terminal
		(Tip: hot; ring: cold, sleeve: ground)
	Load impedance:	More than 600 Ω/ohms
	Level:	+4 dBu
•	SEND output	Monaural x 2	Unbalanced 1/4" TS terminal
	Load impedance:	10 kΩ/kohms
	Level:	–10 dBV
•	Headphones output	Stereo
	Load impedance:	40 Ω/ohms
	Level:	400 mW
•	Digital coaxial output	Stereo RCA terminal, IEC958 Consumer
		(Fs: 44.1 kHz, 48 kHz, 96 kHz)
•	USB audio output	Stereo x 4 (monaural x 8) 24 bit, 44.1 kHz, 48 kHz, 96 kHz USB B
n GENERAL
	USB MIDI I/O:	IN: 1ch, OUT: 1ch MIDI1.0, MIDI Clock		USB B
	MIDI OUT:	OUT: 1ch MIDI1.0, MIDI Clock		5pin DIN
	Channel level meters:	PPM 16-point LEDs from –40 to +10 dB, peak display
	Cue master level meters:	PPM 24-point LEDs from –50 to +16 dB, peak display
	Channel Fader:	60 mm Conductive Plastic Type fader
	Crossfader:	45 mm FLEX Fader (Fader Torque Adjustable)
	Dimensions:	320(W) x 357(D) x 90(H) mm
	Weight:	7.6 Kg
	Supply voltage:	AC 120 V, 60 Hz (U.S.A. and Canada models)
		AC 230 V, 50 Hz (European models)
	Power consumption:	43 W
	Operational temperature:	+5ºC to +35ºC
	Operational humidity:	25% to 85%
	Storage temperature:	–20ºC to +60ºC

Getting Started Connections Basic Operations Effector Function Fader Start USB Utility

•	USB audio inputs	Stereo x 4 (monaural x 8) 24 bit, Fs: 44.1 kHz, 48 kHz, 96 kHz USB B
•	MASTER output
	Balanced:	Stereo, balanced XLR terminal
		(1: Ground, 2: Hot, 3: Cold)
	DA converter:	32-bit 128x oversampling advanced multi-bit converter
	Load impedance:	More than 600 Ω/ohms
	Level:	+4dBu
	Frequency response:	20 Hz to 20 kHz (±0.5 dB)
	THD:	Less than 0.05%
	Signal to Noise ratio:	100 dB
		89 dB (Phono)
	Crosstalk:	Less than –110 dB (1 kHz)
	Unbalanced:	Stereo RCA terminal
	Load impedance:	10 kΩ/kohms
	Level:	0 dBu
•	REC output	Stereo	Unbalanced RCA terminal
	Load impedance:	10 kΩ/kohms
	Level:	–10 dBV

379mm 357mm

320mm

90mm
112mm	Unit: mm

Specifications Troubleshooting

19