Vestax PMC 250 owner manual HOW to Change the Fader Unit

HOW TO CHANGE THE FADER UNIT

■HOW TO REMOVE THE TOP PANEL

○1 Remove all slide fader knobs' and screws on the top panel.

○2 Remove the top panel.

■HOW TO CHANGE THE FADER UNIT

○1 Remove the screws on the fader panel.

○2 Remove the fader unit from position in mixer.

○3 Carefully remove the multi-cable connector from fader unit.

○4 Attach multi-cable connector to new fader unit.

○5 Position the fader unit carefully and secure with screws.

Top panel

Inputfader� unit

Crossfader� unit

Note

Use a plus driver fitting screw.

Caution: When you change any parts, do not loose the screws with marking.

Insert the � multi-cable connector

CF-PCV For

PMC SERIES ( PMC05ProII, PMC06ProA, etc)

Set switch to "PCV" position.

PMC CONNECTOR

8

Set switch to "PMC" position