Vestax DJ Effector owner manual Side Panel

①POWER INDICATOR

LED will light when the power is on.

②MIX CONTROL

Slide to the left, EFFECT is active. Slide to the right, NORMAL is active. In the center position, mix of both.

⑤BIAS CONTROL (AUTO MODE ONLY）

The center of the frequency band in a shifted signal can be moved from 10kHz to 100Hz and the LFO effect will be active according to the setting.

⑥DEPTH CONTROL （AUTO MODE ONLY）

This is to control the width of phasing from wide to narrow. It adjusts the depth of modulation of the phase sound.

③PHASE MODE SELECT SWITCH

This switch is to select 3 types of phase mode.

(a)MONO PEAK -Single Peak type shifter to create dynamic phasing sound.

(b)MONO DIP -Single Dip type shifter to create natural phasing sound.

(c)STEREO DIP -Stereo Dip type phase shifter to create ambient sound.

④PHASE SHIFT SELECT SWITCH

Select the range of how deep the phase sound is out of 2, 4, 6, 8, 10, 12 steps.

⑦SPEED CONTROL （AUTO MODE ONLY）

The is to control the speed of phasing from fast to slow. It adjusts the speed of the modulation of the phase sound.

⑧AUTO / MANUAL SELECT SWITCH

Push in to activate AUTO MODE.

⑨MANUAL CONTROL

For manual manipulation of the phase sound based on the settings (3),(4).

SIDE PANEL

⑬	⑪			⑩	INPUT SELECT SWITCH
				PHONO(-46dB) / LINE(-10dB) / CD(0dB)
				⑪	OUTPUT JACK [RCA pin jack]
				⑫	INPUT JACK [RCA pin jack]
				⑬	GND TERMINAL
				Connect the ground cable here.
⑭	⑫	⑩	LINE	⑭	DC JACK
				Vestax Adaptor DC-15V.

PHONO CD

4