Installing the Keyboard

Procedure

NOTE: If you are installing a new keyboard, fold the cables the same way they are folded on the old keyboard.

1.Slide the keyboard and keyboard-backlight cables into the respective connectors and press down the latches to secure the cables.

2.Turn the keyboard over, slide the tabs on the keyboard into the slots on the palm-rest assembly, and snap the keyboard into place.

CAUTION: Do not apply excess pressure while folding the cables.

The cables on the keyboard are not folded when you receive a replacement keyboard. Follow these instructions to fold the cables on the replacement keyboard the same way they are folded on the old keyboard.

1.Place the keyboard on a flat and clean surface.

17

Page 17
Image 17
Dell 3550 owner manual Installing the Keyboard