Installing the Camera, Removing the System Board

3.Perform the following steps as shown in the illustration:

a.Disconnect the camera cable from the connector on the camera module [1].

b.Lift and remove the camera from the display assembly [2].

Installing the Camera

1.Connect the camera cable to the connector on the camera module.

2.Align the camera module in its position on the computer.

3.Install:

a.Display Bezel

b.Battery

c.Base Cover

4.Follow the procedures in After Working Inside Your computer.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.Base Cover

b.Battery

c.Hard Drive

d.WLAN Card

e.System Fan

f.Keyboard

g.Base Frame

h.Heatsink

3.Perform the following steps as shown in the illustration:

a.Lift the locking tab [1].

b.Disconnect the LED and touchpad cables [2].