Stanton SCS.1m user manual Figure A.4

To disable a device, right-click on it (e.g. on the Ethernet adapter) and choose Disable. The disabled device will be marked with a red cross. (Figure A.4)

Figure A.4

Now, check the DPC Latency Checker to see if the excessive latency values (red bars) disappeared. If yes, we have found the problem, if not, try the next device. To enable a device again, choose Enable from the context menu.

After you have identified the device driver which is responsible for the dropouts, visit the device vendor's Web site or contact its Customer Support department to find an update for this driver. If there is no update available at the moment, you may decide to disable that particular device while you are using streaming applications.

37