Baldor MN754 manual Hi RES Parameters, Parameter Adjustable Range Factory User Setting

Hi RES Parameters

Level 1, Input Setup Block

Parameter	P#	Adjustable Range	Factory	User Setting
COMMAND	1402	3-KEYP AD	1
SOURCE		4-NETWORK
		5- Opt1 Ana In1
		6- Opt1 Ana In2
		7- Opt2 Ana In1
		8- Opt2 Ana In2
		9-EXB PULSE FOLL
OP1 ANA IN1	1451	0-None, 1-(-10V to+10V),	1
TYPE		2-(-5V to+5V),
		3-(4to20mA), 4-(0to20mA)
OP1 ANA IN1	1452	0-OFF, 1-ON	0
Invert
OP1 ANA IN1	1453	0.0% TO 300.0%	100.0
Gain
OP1 ANA IN1	1454	-100.0% TO 100.0%	0.0
Offset
OP1 ANA IN1	1455	0.0% TO 75.0%	0.0
Deadband
OP1 ANA IN1	1456	0 (No Filter) TO 6 (Max Filter)	0
Filter
OP1 ANA IN2	1457	0-None, 1-(-10V to+10V),	1
TYPE		2-(-5V to+5V),
		3-(4to20mA), 4-(0to20mA)
OP1 ANA IN2	1458	0-OFF, 1-ON	0
Invert
OP1 ANA IN2	1459	0.0% TO 300.0%	100.0
Gain
OP1 ANA IN2	1460	-100.0% TO 100.0%	0.0
Offset
OP1 ANA IN1	1461	0.0% TO 75.0%	0.0
Deadband
OP1 ANA IN1	1462	0 (No Filter) TO 6 (Max Filter)	0
Filter

OP1 parameter selections (P#1451 to 1462) are available if the expansion board is installed in Slot1 of the Control.

4‐2 Setup