Baldor MN754 manual OP2 ANA IN1

Hi RES Parameters Continued

Level 1, Input Setup Block Continued

Parameter	P#	Adjustable Range	Factory	User Setting
OP2 ANA IN1	1463	0-None, 1-(-10V to+10V),	1
TYPE		2-(-5V to+5V),
		3-(4to20mA), 4-(0to20mA)
OP2 ANA IN1	1464	0-OFF, 1-ON	0
Invert
OP2 ANA IN1	1465	0.0% TO 300.0%	100.0
Gain
OP2 ANA IN1	1466	-100.0% TO 100.0%	0.0
Offset
OP2 ANA IN1	1467	0.0% TO 75.0%	0.0
Deadband
OP2 ANA IN1	1468	0 (No Filter) TO 6 (Max Filter)	0
Filter
OP2 ANA IN2	1469	0-None, 1-(-10V to+10V),	1
TYPE		2-(-5V to+5V),
		3-(4to20mA), 4-(0to20mA)
OP2 ANA IN2	1470	0-OFF, 1-ON	0
Invert
OP2 ANA IN2	1471	0.0% TO 300.0%	100.0
Gain
OP2 ANA IN2	1472	-100.0% TO 100.0%	0.0
Offset
OP2 ANA IN1	1473	0.0% TO 75.0%	0.0
Deadband
OP2 ANA IN1	1474	0 (No Filter) TO 6 (Max Filter)	0
Filter

OP2 parameter selections (P#1463 to 1474) are available if the expansion board is installed in Slot2 of the Control.

Setup 4‐3