—
Control Switch
Unique
A classic Milkshake Mixer with a heavy duty
Spindle and Twin Aeration Discs
Commercial design, twin aeration discs, combines ingredients in seconds, supported by a stainless steel spindle.
Stainless Steel Cup
Large capacity 28.5 ounce (850 ml) stainless steel cup reduces splashing and is ideal for preparing icy cold milkshakes.
USING YOUR PRODUCT
1.Prior to first use, clean the Milkshake Mixer according to the instructions in the “Cleaning Your Product” section.
2.Be sure unit is “OFF.”
3.Plug the power cord into a power outlet.
4.Place ingredients into cup.
Note: We recommend you do not fill liquid beyond the top fill mark on the side of the cup (13 oz./380 ml). This will help to prevent the mixture from splashing out during mixing. The volume of milkshakes will increase, which makes the large cup ideal for the frothiest shakes.
5.Attach the cup to the Milkshake Mixer by sliding the lip of the cup up under the cup holding clip and sitting the bottom edge of the cup on the cup rest.
Note: The Milkshake Mixer will only operate when the cup is in place.
6.Turn the upper section of the motor head to low speed and mix for 3 seconds. If your recipe requires high speed, turn the upper section of the motor head to high speed after mixing for
3 seconds on low speed; otherwise continue mixing on low speed until drink is desired consistency.
Important: Do not operate continuously for more than 4 minutes.
7.Turn the upper section of the motor head to “OFF” and remove the cup. Enjoy!
Holding Clip
Cup Rest