Precision Power MaxxBass manual Front Stereo Configuration

Page 10

WIRING CONFIGURATIONS

The MaxxBass® Processor is recommended in two different configurations.

1. Front Stereo Configuration

The figure below illustrates the wiring for a front stereo configuration. One MaxxBass® Processor is used between the front channel source and front speaker amplifier to increase the bass response only on the front speakers.

Implementing MaxxBass® on the front speakers will increase the perceived bass response of these speakers down to 30-40Hz providing a Virtual Subwoofer. The listener will achieve better bass balance and imaging with a rear mounted subwoofer or trunk mounted speakers with sufficient bass response.

In-dash

CD Receiver

Front Rear

Maxx

Bass®

Power

Amplifiers

Front speakers

LF with Virtual RF SubwooferTM

LRRR

Subwoofer

9

Image 10

Contents MaxxBass Table of Contents Congratulations WHY USE Maxxbass What is Maxxbass HOW does Maxxbass Work Maxxbass Signal Flow Specifications Massbass Outline and Dimensions Front Stereo Configuration Dual Stereo Configurations Page Input Maxxbass Processor Settings No Sound Sound in ONE Channel only Limited TWO Year Consumer Warranty