WHY USE MAXXBASS
PrecisionPowerTM will introduce the first MaxxBass® processor to the automotive market. The MaxxBass® processor is ideal for improving the perceived bass response in door mounted speakers without upgrading the speakers or amplifiers.
MaxxBass® provides subwoofer like performance with perceived bass response to
1) Front Stereo Configuration
One MaxxBass® Processor is used between the front channel source and front speaker amplifier to increase the bass response on only the front speakers. This is recommended to improve bass imaging in high performance systems with rear mounted subwoofers.
2) Dual Stereo Configurations
For systems without rear subwoofers, the user may prefer to use two MaxxBass® Processors, one for the front speakers and one for the rear speakers. Although not nearly as good bass performance as using a high performance subwoofer, this configuration will provide close to subwoofer like performance without the space requirements of a high performance subwoofer. This is a practical alternative for bass performance where a subwoofer system can not be added.
WHY IS MAXXBASS BETTER
MaxxBass® is NOT a bass boost technology. Bass boost technologies try to compensate for lack of bass frequency range by equalizing or increasing the relative volume of the frequencies near the speaker limit.
This increases amplifier and speaker excursion limits, which can damage the system at high levels.
This destroys the intended frequency balance of music.
3