No Sound

When the Remote INTENSITY control is plugged into the MaxxBass® Processor, the Remote INTENSITY control become active and the INTENSITY control on the MaxxBass® Processor is disabled. This allows the user to install a remote control in a location different than the MaxxBass® Processor and place in a more convenient position for the listener such as underneath the dashboard or in the glove compartment.

The INTENSITY control on the MaxxBass® Processor system is only active when the Remote INTENSITY control is not plugged in. This control is provided for users, who do not wish to use the Remote INTENSITY control.

TROUBLESHOOTING

Is the POWER LED lit?

YES

Check Input cables for signal by Connecting them straight to the Subwoofer amplifier.

Check power and remote turn-on wire for voltage. Make sure the ground wire is Secure.

ANY SOUND NOW?

YES

Problem is in the Crossover. See your local Authorized PrecisionPowerTM Dealer.

Problem is elsewhere in the system. Check head Unit and amplifiers.