Microphone Volume Controls | American Audio CommanderPlus manual

COMMANDER PLUS™	CONTROLS AND FUNCTIONS

of bass applied to microphone signal.

2.TALKOVER CONTROL - This function all decreases all signal output except the microphone signal. The amount of decreased is controlled by the TALKOVER LEVEL (4). When the switch is in the “Auto Mute” position talk over will automatically engage when the when the mixer receives a signal. MIC 1 has a “Talk Over” position that decreases signal output regardless of an incoming microphone signal. In the OFF position all signals remain at their standard levels.

3.MICROPHONE VOLUME CONTROLS -

MIC 1 VOLUME CONTROLS - This slider controls the output volume of MICROPHONE 1 (3). However, master volume is controlled by the MASTER VOLUME CONTROL (26).

MIC 2 VOLUME CONTROLS - This slider controls the output volume of MICROPHONE 2 (3). However, master volume is controlled by the

4.TALKOVER LEVEL - This knob is used to adjust the amount general volume will be decreased when the TALKOVER (2) function is engaged. A maximum of -15dB can be applied to the “Talkover.”

5.ASSIGN SWITCH - This push button switch is used to turn the CROSSFADER (9) function on and

off.

6.FADER ASSIGN SWITCH - This is a four position switch that assigns a channel to the CROSS- FADER (9). When a channel is assigned to the left side of the CROSSFADER (9) that channels output level is routed to and controlled by the CROSSFADER (9). Sliding the CROSSFADER (9) to left posi- tion will send full the assigned channels volume output to the MASTER VOLUME LEVEL (26) and slid- ing the CROSSFADER (9) to right position will cut that channels volume to MASTER VOLUME LEVEL (26). The reverse is true for the right channel fader assign switch. When ASSIGN SWITCH (5) is set to the "OFF" position the crossfader will have no function.

7.Q-START ON/OFF SWITCH - This function works in conjunction with a compatible American DJ® or American Audio® “Q” Start CD player. When used with a compatible CD player, you can use the cross- fader to start and stop a CD Player with the slide of the mixer’s CROSSFADER (9). The ON/OFF “Q" START SWITCH activates the FADER “Q" START feature. When in the ON position, the FADER “Q" START automatically returns the CD player to the preset CUE POINT.

For example; Assuming you have two compatible American Audio™ CD players or a compatible dual CD player connected to channels one and two. When the Fader "Q" Start option is turned on, sliding the crossfader to the far left position will trigger playback on CD player

1.When the crossfader is pushed to the far right position, playback on CD player 2 will begin, and CD player 1 will return to the cue position. Refer to your American Audio CD player user manual for setting CUE POINTS. Turn the ON/OFF SWITCH to the OFF position to disengaged “Q” Start function and resume to a normal fader.

8.PFL (CUE SELECTOR) BUTTON - These buttons are used to activate a channels “CUE” mode. A red LED next to the Cue button will glow when a channels cue mode is activated. The Cue function sends a channels incoming signal to the headphones. The cue level is adjusted by the CUE LEVEL KNOB (14). Be sure the CUE MIXING SLIDER (12) is set to the “CUE” position to hear a selected chan- nel source.

9.FEATHER FADER PLUS CROSSFADER - This fader is used to blend the output signals of chan- nels one and two together. When the fader is in the full left position (channel 1), the output signal of channel one will be controlled by the master volume level. The same fundamentals will apply for chan- nel two. Sliding the fader from one position to another will vary the output signals of channels one and