American Audio CommanderPlus specification

COMMANDER PLUS™	CONTROLS AND FUNCTIONS

equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the LINE LEVEL SELECTOR SWITCH (40) is in the “AUX 2” position. The red colored RCA jack represents the right channel input and the white represents the left channel input. Input volume will be controlled by channel two CHANNEL FADER (10). The channel SOURCE SELECTOR SWITCH

(31)must be in the "Phono 2/Aux 2" position, to monitor any source connected to these jacks.

52.CHANNEL 1: PHONO 1 INPUT/AUX 1 and LINE INPUT JACKS - The type of input must directly reflect the selected mode of the LINE LEVEL SELECTOR SWITCH (40). Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the LINE LEVEL SELECTOR SWITCH (40) is in the “AUX 1” position. The red colored RCA jack represents the right channel input and the white represents the left channel input. Input volume will be controlled by channel one CHANNEL FADER (10). The channel SOURCE SELEC- TOR SWITCH (31) must be in the "Phono 1/Aux 1" position, to monitor any source connected to these jacks.

53.MICROPHONE 3 CONNECTOR - This jack is used to a connect a microphone to the mixer. Con- nect you microphone via this 1/4 inch (6.3mm) jack. This microphone will be controlled through the channel 4 fader. The channel 4 EQ will also effect the microphone output. Be sure to flip the SOURCE SELECTOR SWITCH (31) to the “MIC 3” position to operate this microphone’s input signal.

COMMANDER PLUS™

CONTROLS AND FUNCTIONS