COMMANDER PLUS™SPECIFICATIONS
Model: Commander Plus 4 Channel Mixer
POWER SUPPLY: | AC 120v~60Hz/220v50~60Hz, User Selectable |
DIMENSIONS: | 482 x 176 x 72mm |
WEIGHT: | 7 Lbs. / 2.8 kg |
CROSSFADER: | Feather Fader Plus - VCA detecting fader start control - |
| Low grounding impedance crossfader |
POWER CONSUMPTION: | 12W typical, 20W w/ full headphone output |
HEADPHONE IMPEDANCE: | 16 Ohms |
ENVIRONMENTAL CONDITION: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85% RH
Input Sensitivity (Level/Impedence): |
|
LINE: | 1.22V (100mV)10K Ohm |
PHONO: | 1.22V (2.0mV) 47K Ohm |
MICROPHONE: | 1.22V (2.2mV) 600 Ohm |
AUX: | 1.22V (100mV)10K Ohm (Load = 1Khz RMS) |
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms | |
MASTER OUT (XLR): | 0dBV (1V)/470 Ohms ±3dB |
REC OUT (RCA): | |
PHONES (LOAD=32 OHMS): | |
Maximum Output (Load = 47K, THD = 5%) |
|
MASTER/ZONE: | < 18dBV (8V) |
REC: | < 18dBV (8V) |
PHONES (Load=32 ohms): | < 4.6dBV (1.7V) |
CHANNEL BALANCE: | WITHIN 3dB |
Frequency Response: |
|
LINE/AUX: | 20Hz - 20KHz, ±0.5dB |
PHONO: | 20Hz - 20KHz, ±1dB except for controlled attenuation |
| of |
MICROPHONE: | 20Hz - 15KHz, ±0.5dB |
Signal to Noise Ratio (maximum output) | |
LINE/AUX: | BETTER THAN 100dB |
PHONO: | BETTER THAN 84dB |
MIC: | BETTER THAN 85dB |
THD - Total Harmonic Distortion (1Khz, 0dBV Output): | |
MASTER OUTPUT (LOAD = 47K OHMS): | LESS THAN 0.01% |
PHONO: (LOAD = 32 OHMS): | LESS THAN 0.03% |
CROSS TALK: | < 40dB @ 1Khz, Between left and right channels |
Channel Equalizer: |
|
BASS: | +12 |
MID: | +12 |
TREBLE: | +10 |
Microphone Equalizer: |
|
BASS: | |
TREBLE: |
©American Audio® - www.americandj.com - Commander Plus™ Instruction Manual Page 22